Portable turbidity suspended solids analyzer

NegotiableUpdate on 03/17

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The YTUBSS-2P portable turbidity suspended solids analyzer is developed based on the national standard weight method for measuring suspended solids. The turbidity is determined according to GB13200-91 "Determination of Turbidity in Water Quality", and an imported high brightness long-life cold light source and colorimetric dish are used for comparison. The operation is simple and time-saving, and it is equipped with a large screen LCD Chinese display for direct data reading; The instrument comes with a standard curve and can also calibrate the curve as needed; Comes with measurement value storage function and printing (date, time, parameters, test data); The instrument has data power-off protection and data storage functions to prevent data loss due to errors.

Product Details

This instrument is widely applicable to clean water samples such as surface water and ground water. If it is necessary to measure wastewater with high pollution levels, corresponding treatment and measurement are required. Not suitable for the determination of low turbidity water, the instrument has a low turbidity recognition degree of 3 degrees (NTU).
YTUBSS-2P portable turbidity suspended solids determinationTechnical specifications of the instrument

Measurement method: Suspended solids: National standard weight method Improved turbidity: GB13200-91 "Determination of Turbidity in Water Quality" Measurement Range: Suspended solids: 5-500 mg/L Turbidity: 0.5-1000NTU (segmented)
Detection limit: Suspended solids: 5 mg/L Turbidity: 0.5NTU
Dissolving temperature: No need for digestion
Colorimetric method: Colorimetric dish colorimetric
Resolution: 0.001 mg/L
Accuracy: The indication error shall not exceed 5%
Repeatability: Relative standard deviation not exceeding 3%
Optical stability: less than 0.001A/20 minutes
Power supply: AC (220V ± 5%), 50Hz
Environmental temperature: 5-40 ℃
Environmental humidity: ≤ 85% without condensation
Weight: Host<1.3kg

YTUBSS-2P PortableTurbidity suspended solids analyzerInstrument characteristics

LCD screen interface design, fully Chinese operation, direct data reading, simple operation.
Imported cold light source, no preheating required, energy-saving, environmentally friendly, fast response, with a lifespan of up to 100000 hours and strong optical stability.
Built in standard curve, no need for user calibration and calibration.
Enable guided measurement with one click operation, simple and fast
Adopting a digestion colorimetric system, reducing manual operation, the measurement is simple, fast, and safe.
Customize more than 40 curves and store 200 complete detection data.
Equipped with power-off protection function to prevent data loss.
One click factory reset to prevent loss or accidental deletion of standard curves.
The equipment is not damaged by human factors, with a three-year warranty and software upgrades.