Portable Iron Gauge WM-TTL2

Product Overview:

1. Conventional wear metal analysis of mechanical lubricants can provide early warning for imminent failures. WM-TTL2 provides an accurate and easy-to-use solutionSolution: Measurement scheme for offline measurement of submicron iron debris concentration.

2. The instrument provides the necessary resolution to determine whether the mechanical equipment is functioning properly or whether additional analysis is needed to assist.

3. Wear particle monitoring is particularly sensitive to emerging mechanical wear issues and is often effective before vibration analysis, thermal imaging, or other indirect monitoring methodsDetected mechanical equipment malfunction.

Yateks TTL-2 is an independent device that can detect mechanical wear status by analyzing a small amount of oil samples. Provide ferromagnetic wear particlesRepeatable and accurate determination of concentration, at the minimum level of a single PPM. It provides iron pollutant particles of any size or quantity, even submicronsOutput the mass ratio of particles.

Application scope:

Petroleum analysis laboratory, wind energy, oil and gas processing, refinery, power generation, gas compression, manufacturing, pulp and paper, transportation, aerospaceProcess machinery, military.

Product Features:

1. Mechanical failure analysis; Promote plan maintenance; Sudden malfunctions and changes in the monitoring system; Performance evaluation and monitoring of filters; Easy to use - only non essentialSamples are often scarce and do not require any pre-treatment, making them portable, sturdy, and durable; Independent calibration method, users can easily calibrate themselves.

2. The detection accuracy of oil spectrometers is limited by the size of the abrasive particles in the analyzed oil sample. When the abrasive particle size exceeds 3-8 microns (the degree of limitation for different elements is not significant)When consistent, the reliability of the analysis results of traditional oil spectrometers decreases. But for some heavy equipment (such as large gearboxes and bearings), heWe will produce approximately 10um of abrasive particles in the early stages of wear. It is obvious that the traditional oil spectrometer has significantly reduced its ability to monitor this wear state.

3. The instrument adopts a 3.2-inch touch screen display, which is more convenient and fast to operate.

4. Built in software functions: data storage, curve trend display, alarm value setting, historical record query, can store oil sample test results corresponding to project numbersEquipment number, oil sample number, etc.

5. Data can be directly exported using a USB flash drive, supporting a 64GB capacity USB flash drive.

6. Built in battery pack (over four hours), with power adapter, can be used for external 220V AC connection.

Technical Indicators:

1. Measurement range: 0~5500ug/L

2. Measurement accuracy: ± 3%

3. Repeatability: ± 3%

4. Detection limit: 5ug/ml

5. Testing time: 2 seconds per sample

6. Required sample: 2ml

7. Display: 3.2-inch touch screen display

8. Battery: Built in battery pack (more than four hours), with power adapter, can be used for external 220V AC connection

9. Size: 178 * 150 * 150cm

10. Weight: 1250g (bare metal)

11. Working temperature: 10 ℃ -50 ℃

12. Storage temperature: -20 ℃ -70 ℃

13. Power supply voltage: 220V AC ± 10%, 50Hz ± 10%