- Phone
-
Address
Room 1723-1, Building A, Shouke Building, No. 14 West Third Ring South Road, Fengtai District, Beijing
Product Categories
Beijing Xinbaotong Measurement and Control Technology Co., Ltd
Portable Acoustic and Vibration Signal Analysis System
NegotiableUpdate on 05/19
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
DT9857E portable acoustic and vibration signal analysis system analog input specification parameters ◎ Channel number: 8/16 channel synchronous analog input, expandable to 64 channels. ◎ Supports IEPE sensors, 4mA constant current source ◎ Resolution: 24 bits
Product Details
DT9857EPortable Acoustic and Vibration Signal Analysis System
simulation
Enter specification parameters
Channel count: 8/16 channels synchronous analog input, expandable to 64 channels.
◎ Supports IEPE sensors, 4mA constant current source
◎ Resolution: 24 bits
◎ Dynamic range: 118dB typical
◎ Input range: ± 10V, ± 1V
◎ High sampling rate: 105.469kHz
◎ Program controlled AC and DC coupling
Delta Sigma filter: 0.49 times
Sampling rate, bandwidth -3dB
◎ Analog filter: Low pass 400kHz; High pass 0.5Hz (AC coupling)
◎ Input impedance: 1M Ohm
Channel crosstalk: -110dB
◎ Total harmonic distortion: -110dB typical
Simulate output specification parameters
◎ Number of channels: 2 32-bit analog outputs
◎ Small sampling frequency: 30kHz
Large sampling frequency: 216kHz
◎ Output range: ± 10V
◎ DAC Delta Sigma filter
◎ Analog filter: 120kHz low-pass
◎ Output signal: fixed level or waveform
◎ Bias error: ± 0.5mV
◎ Gain error: ± 0.03%
Other inputs and outputs
◎ 1 speed channel, with a range of ± 30V and a maximum input frequency of 1MHz
◎ 1 counter/timer channel
◎ Digital IO: 8 inputs, 8 outputs, machine specifications and parameters
◎ Working environment: 0 ℃ to 55 ℃, 0 to 95% relative humidity, non condensing
◎ Power supply: 4.75-280VDC
◎ Volume: 224mm × 247mm × 44mm
Weight: DT9857E-16, 1.5kg; DT9857E-8, 1.2kg software
QuickDAQ FFT Analysis software
QuickDAQ Advanced FFT Analysis software
◎ Support LabVIEW
◎ Support MATLAB
characteristic
High cost-effectiveness, compact and portable, weighing about 1.5 kilograms.
◎ USB interface
◎ 8/16 channel synchronous input, IEPE input, 4mA/24V constant current source power supply, programmable AC/DC coupling.
24 bit Delta Sigma A/D conversion, high resolution.
The high sampling rate is 105.4KHZ.
◎ 1 speed input channel; Two analog output channels.
◎ 8 digital inputs and 8 digital outputs.
All input and output measurement data can be kept coherent and synchronized
Multiple triggering modes: software triggered, external digital (TTL) triggered, analog signal threshold triggered. Pre trigger and post trigger can be set.
◎ The data format supports ME'scopeVES modal analysis software.
◎ Equipped with software functions *, and user-friendly interface, easy to use.
Similar Product Recommend
