Pneumatic mixer

brief

Equipment used for mixing two or more different powders, granules, or other fine loose materials, especially air flow mixers powered by compressed air. It contains a thin-walled hollow chamber with a cylindrical upper part and a conical lower part. The chamber is equipped with a feed inlet, a discharge outlet, a filter equipped air outlet, and a discharge valve controlled by a cylinder. A mixing head with an air inlet and a set of spray holes connected to the air inlet is fixed on the chamber. The feature is that a set of spray holes connected to the air inlet are set on the inner ring of the mixing head and evenly distributed along the circumference of the inner ring. The centerline of each spray hole is inclined radially with the inner ring at an angle of 30-50 °. This utility model ensures the mixing effect and saves energy consumption by changing the angle of the compressed air spray hole and the proportion of the cylindrical part of the warehouse body, and can also solve problems such as bridging that may occur during material cutting.

Industry Applications
Milk powder/food/pharmaceuticals/chicken powder/cosmetics/pigments/other industries

Main features
(1) Fast homogenization speed: one batch only takes 3-5 minutes
(2) The filling coefficient is 0.4-0.6% higher
(3) No mechanical transmission: no frictional heat generation, no lubricant contamination of the product
(4) Large mixing output: several hundred cubic meters can be mixed at once, enabling ultra large homogenization mixing
(5) Easy to use: High degree of automation, PLC full process control
(6) Strong adaptability: It can be homogenized and mixed, and can also be used as a storage material warehouse, with no dead corners or residues of materials, meeting GMP requirements. Save space and facilitate integration with production lines.
(7) Efficient and energy-saving: The unit energy consumption is 30% of the mechanical homogenization mixing

Parameters

model	NQH-1	NQH-5	NQH-10	NQH-15	NQH-30	NQH-50	NQH-80	NQH-100
Full volume	1	5	10	15	30	50	80	100
Compressed air working pressure	0.8-1.5
mixing time	3-6
load factor	0.4-0.6
Material gas separator	Composite filter cartridge, pulse blowback, filtration air speed 1-1.2
Allowable working temperature	≤70