Pneumatic automatic cutting and testing machine

Pneumatic automatic cutting test pieceThe machine is powered by air pressure and only needs to be connected to an air pressure source to operate. It is suitable for cutting rubber, tape, and leather in the laboratory ... etc., dumbbell test pieces for testing, and samples of other special materials such as melamine board or various composite materials. It can also be used as a small press.

Pneumatic automatic cutting and testing machine3 tons of forceThe parameters are as follows:

model HS-5016-AR3

Give strength 3 ton

Power source(customer-supplied)minimum5 kg/c㎡ The above air pressure

Pneumatic cylinder stroke50 mm

Cut thickness 10mm

Effective use of space(W×D×H) 30 × 18 × 8 cm

Pressure plate size(W×D) 18 × 8 cm

volume(W×D×H) 45×60×80 cm

weight 60 kg

If there are any changes or variations to the product specifications and content, please refer to the actual quotation information provided by our company.

The following are the parameters for a 5-ton force:

model HS-5016-AR5

Give strength 5ton

Power source(customer-supplied)minimum5 kg/c㎡ The above air pressure

Pneumatic cylinder stroke50 mm

Cut thickness 10mm

Effective use of space(W×D×H) 40 × 34 × 8.5 cm

Pressure plate size(W×D) 40 × 34 cm

volume(W×D×H) 45×60×80 cm

weight 120 kg

If there are any changes or variations to the product specifications and content, please refer to the actual quotation information provided by our company.