-
E-mail
3066993710@qq.com
-
Phone
18040551366
-
Address
No. 422, Road 22, Binhai Park, Wenzhou Economic and Technological Development Zone, Zhejiang Province
Product Categories
Chuanli Holdings Co., Ltd
Pneumatic angle quick opening sludge discharge valve
NegotiableUpdate on 06/12
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Pneumatic angle quick opening sludge discharge valve
Product Details
Pneumatic angle quick opening sludge discharge valve
| Product Name: | Pneumatic angle quick opening sludge discharge valve |
| model: | J644X |
| Caliber: | DN50-400 |
| Pressure: | 0.6-1.6MPa |
| texture of material: | Cast iron, cast steel, stainless steel, etc |
Application scope of pneumatic angle quick opening sludge discharge valve:
Pneumatic angle quick opening sludge discharge valveMainly used for various types of water tanks in water companies to remove sediment or dirt from the bottom of the tank. It can also be installed in industrial pipelines with working media such as water, gas, and tanks for interception purposes. This valve is mainly installed outside the bottom wall of individual sedimentation tanks to remove sediment and dirt from the bottom of the tank.
Working principle and performance of pneumatic angle quick opening sludge discharge valve:
Pneumatic angle quick opening sludge discharge valveIt consists of two main parts: a cylinder and an angle type globe valve. The cylinder is powered to drive the valve plate up and down, opening or closing the valve body passage to achieve fluid flow.The cylinder piston seal is a wear-resistant O-ring with good sealing performance.The opening speed is fast, usually within 10 seconds, the valve plate is fully opened, and the valve plate and valve body are soft sealed. After closing, the sealing performance is good and there is no leakage. If equipped with a pneumatic electromagnetic directional valve, remote control, self-control, etc. can be achieved. If equipped with a manual device, it can be installed in a row of 4-12 units, and can be started and closed simultaneously, with the driving pressure being air.
aerodynamicTechnical parameters of angular quick opening sludge discharge valve:
1. Valve nominal pressure: 0.6-1.6Mpa
2. Valve body sealing pressure: 1.1Mpa
3. Cylinder working pressure: 0.3-1.0MPa
4. Cylinder working medium: gas
5. Medium temperature: room temperature
Note: If there are special requirements (indicated when ordering)
aerodynamicAngle type quick opening sludge discharge valve parts material:
J644X angle quick opening sealed leather bowl |
valve stem |
Valve plate |
cylinder head |
cylinder |
valve body |
Wear resistant nitrile rubber |
stainless steel |
HT200 |
HT200 |
HT200 |
HT200 |
aerodynamicOutline structure diagram of angle type quick opening sludge discharge valve:
aerodynamicConnection size of angle type quick opening sludge discharge valve:
Nominal diameter (mm) | size (mm) | model |
J744X-10、J644X-10 |
Connecting thread G |
Quick opening angle valve stem material |
|||||
H |
L1 |
L2 |
D |
D1 |
z-Φd |
|||
80 |
480 |
135 |
125 |
195 |
160 |
4-18 |
1/2＇ |
stainless steel |
100 |
500 |
145 |
125 |
215 |
180 |
4-18 |
1/2＇ |
stainless steel |
150 |
620 |
203 |
140 |
280 |
240 |
8-23 |
1/2＇ |
stainless steel |
200 |
735 |
225 |
185 |
335 |
295 |
8-23 |
1/2＇ |
stainless steel |
250 |
805 |
260 |
205 |
390 |
350 |
12-23 |
1/2＇ |
stainless steel |
300 |
940 |
280 |
245 |
440 |
400 |
12-23 |
3/4＇ |
stainless steel |
350 |
1100 |
305 |
270 |
500 |
460 |
16-23 |
1＇ |
stainless steel |
400 |
1200 |
304 |
310 |
565 |
215 |
16-25 |
1＇ |
stainless steel |
aerodynamicInstallation diagram of angle type quick opening sludge discharge valve:
