Plant growth box

1、 Basic parameter requirements:

1. Capacity: 368 liters

2. (High quality stainless steel liner resistant to corrosion from insects, small animal excrement, seawater, etc.); Sandblasting and oxidation treatment of aluminum alloy shell.

3. Temperature control range: 0 ° C~50 ° C

4. Temperature fluctuation: ± 0.5; Temperature deviation: ≤ 1.0 ° C; Temperature uniformity: ≤± 1.0 ° C

5. Maximum light intensity: 6000lux-2400lux, with infinitely adjustable light intensity.

6. Humidity control range: 50% -95% RH; humidity fluctuation: ± 3% -7% RH

2、 Important technical parameters:

1. Adopting temperature control system and hot gas bypass control technology, precise and stable control of temperature and humidity has been achieved.

2. The applied crankcase pressure regulation system ensures uninterrupted and stable operation of the main engine's core refrigeration power system for 10 years+

3. The combination of hot gas proportional valve and high and low pressure electronic sensors ensures smooth and flexible operation of the compressor, creating the best suitable growth environment

4. High performance gear oil medium external circulation microcirculation refrigeration technology creates a stable, constant temperature and humidity intelligent lighting experimental environment in small spaces.

5. The intelligent fresh air system automatically adjusts experimental conditions such as air carbon dioxide concentration based on actual data in the cultivation room.

6. Adopting a 32-bit microcomputer controller and a 5.0-inch touch screen Touch switch, easy to operate; Reject LCD and button modes

7. Adopting equal illumination technology, the illumination at each point on the same plane is uniform and controllable, and the illumination in each space does not interfere with each other. The illumination accuracy is less than 5Lux.

8. The outer shell is made of stainless steel with anti fingerprint surface and spray coating treatment, and the inner liner is made of mirror stainless steel; Adjustable shelf height; The shelf can be directly extracted outward; The box is made of integral foam with an insulation layer of ≥ 5CM, which is sturdy, durable, and has good insulation properties. There is no condensation on the surface due to a temperature difference of 30 ℃.

9. Spectral structure composition: Suitable for insect and plant growth and breeding induction, 730-750nm wavelength (far red light) accounts for 11%, 620-660nm wavelength (red light) accounts for 55%, 530-560nm wavelength (green light) accounts for 18%, 460-490nm (blue light) accounts for 16%. The luminescent visual effect is similar to the solar spectrum, soft and bright, and the light intensity can be freely adjusted and combined without interference. Reject non adjustable.

10. The box is equipped with a built-in ventilation system, which allows for setting the ventilation volume and wind speed on the touch screen; Fresh air is sent into the incubator through a filter, with an adjustable fresh air exchange rate of 10m3/h; Refusing external controllers affects the overall aesthetics of the system.

11. Detachable light source, side light and top light source can be freely combined to create the best growth environment for insects, microorganisms, animals and plants.

12. Humanized design of the operation panel, with adjustable and movable touch screen height above the ground.

13. Equipped with a USB interface, it can directly store data to a portable drive, and the incubator can store 100000 pieces of data. The controller interface can generate historical curve data, which is convenient for users to query, and can also set different operating parameters for querying different time periods.

14. The device has remote alarm function, which can notify users through SMS, email, WeChat and other means.

15. The device has remote control function, which can realize remote power on/off, remote parameter setting, historical data viewing, etc.

16. The device is equipped with a camera that can observe the growth of animals and plants inside the box in real time.

17. The device is equipped with multiple door lock functions to choose from, such as facial recognition, fingerprint unlocking, card swiping unlocking, etc. It can effectively prevent others from opening the device and affecting the experimental results.

18. Free 2-year warranty, the manufacturer has independent or authorized after-sales service points and parts warehouses in the local area, and can respond quickly and professionally within 2 hours. Free delivery upstairs, free installation and debugging.