Piston type cylindrical mud collector

Name: Sludge CollectorPiston type cylindrical mud collectorSuitable for underwater sediment collection in rivers, lakes, ponds, and other areas with a water depth of 5 meters

Specification: DXTR-HSZZ

1、 Product Usage:

Piston type cylindrical mud collectorMainly used for collecting underwater sediments (sediment, bottom material, sludge), swamp soil, and mud carbon soil from rivers, lakes, and ponds.

2、 Product parameters:

1. Suitable for water depth: 5m;

2. Sampling tube: 100cm in length, 4cm or 5cm in diameter;

3. Stainless steel cutting head (conventional analysis sampling)

4. Engineering plastic cutting head (heavy metal analysis sampling)

3、 Usage:

1. Thread the piston rod through the fixture, then install the piston onto the piston rod, and insert the piston and piston rod into the sampling tube.

2. Put on the cutting head, and then fix the cutting head, sampling tube, and fixture together with a steel strip.

3. Connect the extension rope to the top of the piston rod.

4. Connect the extension rod and T-shaped handle according to the actual situation, and push the piston to the bottom of the sampling tube before sampling.

5. After determining the sampling location, insert the sampling tube vertically into the water and feel that the sampler is not sinking (the cutting head has already entered the mud). Lift the sampler up by about 10-20 centimeters, and then move it back, forth, left, and right by 10-20 centimeters to determine the new sampling point.

6. Tighten the extension rope and fix it so that the piston position is relatively fixed, then push down the T-shaped handle with force to allow the sampling tube to enter the sediment. After reaching the predetermined sampling depth, fix the extension rope on the extension rod or handle and remove the sampler to complete one sampling.

4、 Standard configuration: The configuration is for reference only and may vary according to sampling requirements.

1. One T-handle

2. 1 energy absorbing hammer

3. 5 1-meter-long extension poles

4. 1 sampler (including stainless steel cutting head)

5. 2 engineering plastic cutting heads

6. 2 sampling tubes

7. 4 spare pistons

8. 1 anti stretch rope

9. 1 knife

10. 1 steel tape measure

11. 2 wrenches

12. 1 pair of gloves

13. 1 aluminum box