Phchem III type photochemical reactor

NegotiableUpdate on 11/15

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Phchem III type photochemical reactor Phchem III series photochemical reactor can provide samples for analyzing reaction products and free radicals, determining reaction kinetic constants, measuring quantum yields, etc. It is widely used in research fields such as chemical synthesis, environmental protection, and life sciences

Product Details

Phchem III type photochemical reactor

PhchemIIIPhotochemical reactor

The Phchem series photochemical reactor can provide samples for analyzing reaction products and free radicals, determining reaction kinetic constants, measuring quantum yields, etc. It is widely used in research fields such as chemical synthesis, environmental protection, and life sciences. It is mainly used to study photochemical reactions under conditions such as gas or liquid media, fixed or flowing systems, ultraviolet light or simulated visible light, and whether the reaction vessel is loaded with TiO2 photocatalyst. The emergence of this reactor greatly accelerated the experimental pace, achieved the reaction of multiple parallel samples, improved experimental efficiency, and effectively ensured the consistency of experimental conditions.

Configuration as follows：

The main body includes a reaction chamber, ultraviolet light source, visible light source, filter device, glass reaction vessel, rapid air cooling (or circulating cooling water), and stirrer.

Glass reaction tubes can be selected separately10ml、25ml、50ml， Can pass gas, commonly used quantity is 12.

Lamp model	photoelectric parameters				geometric parameters		Power density W/CM	Lifespan H
Lamp model	Power W	Pipe pressure V	Pipe flow I	Polar distance MM	Full length MM	Diameter MM	Power density W/CM	Lifespan H
MERC-JY125	125	135	2	100	100	12	20	800
MERC-JY250	250	135	2	100	120	15	30	800
MERC-JY300	300	135	3	120	200	18	30	800
MERC-JY 400	400	135	3.25	125	230	20	40	1000
MERC-JY 500	500	135	4.05	125	230	22.5	50	1000
MERC-JY 1000	1KW	135	8.1	125/200	225/335	25	80	1000
MERC-JY 2000	2KW	250	8	250	350	22.5	80	1000

UV Study of Mercury Lamp Light Source The main wavelength is 365nm, the power is 250W/500W, the lamp tube is 220mm long, including a 220V 50Hz regulated power supply and one lamp tube. Adjustable power. Research on Visible Light of Xenon Lamp Light Source Power 500W, effective length of the lamp tube 220mm, including a voltage regulator power supply, one lamp tube. Adjustable power.
	Lamp model	power (KW)	pipe pressure (A)	current (A)	full length (mm)	Luminous body length (mm)	pipe diameter (mm)
	XE-JY500	0.5	50-60	9	190/230	150	10
	XE-JY1000	1	60-70	15.5	300	210	18
	XE-JY 500	1.5	100	15	400	310	10
	XE-JY3000	3	220	14	700	600	15

An idle reactor can be equipped, and additional experiments can be conducted. The photochemical reactor (photocatalytic degradation reactor) consists of two parts: a cold trap and a reactor. That is, the lamp tube is inserted into the cold trap, and the cold trap is inserted into the reactor. The cold trap and the reactor are connected by a grinding mouth to ensure airtightness and can be evacuated. The cold trap is used to pass cooling water, thereby reducing the temperature of the lamp tube and filtering out most of the infrared heat. The quartz material itself helps to achieve better light transmission. Outside the cold trap The reactor of the department has no requirement for transparency. In order to match the grinding mouth of the quartz cold trap, it adoptsPYREXMade of high borosilicate glass. 1. Cold trap JYF225， Quartz material, 60/40 grit, effective length 220mm. 2. reactor JYF250, PYREX glass, effective length 220mm, effective volume 250ml, grinding mouth 60/40, 14/23, 19/26, 24/29. JYF500，PYREXGlass, effective length220mm, effective volume500mlGrinding mouth60/40，14/23，19/26，24/29.