PZFSS0059 Lubricating Oil Evaporation Loss Tester (Wood Alloy Method) PZFSS0059 Lubricating Oil Evaporation Loss Tester (Wood Alloy Method)

When operating the instrument, place the sample in the evaporation loss tester and heat it for 1 hour under certain conditions. The evaporated oil is correctly carried out by the air. Determine the evaporation loss of the sample based on the difference in mass before and after heating. This instrument is suitable for lubricating oil and lubricating base oil. When the instrument is operated, the sample ...

PZFSS0059 Lubricating Oil Evaporation Loss Tester (Wood Alloy Method)
Overview
When operating the instrument, place the sample in the evaporation loss tester and heat it for 1 hour under certain conditions. The evaporated oil is correctly carried out by the air. Determine the evaporation loss of the sample based on the difference in mass before and after heating. This instrument is suitable for lubricating oil and lubricating base oil.
Performance Characteristics
1. Metal bath heating device, safe and environmentally friendly;
2. Imported precision differential pressure gauge to ensure accurate pressure;
3. Adding Wood alloy to the bath body for better heat conduction;
4. Equipped with a specialized vacuum suction system;
5. 7-inch color LCD touch screen, automatic temperature control, timing alarm.
Automatically calculate evaporation loss and store calculation results
6. The evaporation crucible meets the requirements of ASTM standards;
7. Precise pressure regulation system, imported needle valve to ensure accurate flow regulation.
8. There is a gas buffer bottle inside;
9. High power solid-state relay controlled heater;
10. Imported temperature controller with precise control.
Technical Specifications
1. Applicable standard: SH/T0059
2. Temperature control method: digital PID temperature control
3. Temperature control range: normal temperature~250 ± 0.1 ℃, accuracy 0.01 ℃
4. Heating method: Metal bath heating
5. Pressure regulation: high-precision needle valve
6. Suction method: vacuum pump
7. Differential pressure gauge: imported precision inclined tube differential pressure gauge
PZFSS0059 Lubricating Oil Evaporation Loss Tester (Wood Alloy Method)
Overview
When the instrument is operated, the sample is placed in an evaporation loss tester and heated under certain conditions for 1 hour, and the evaporated oil is properly carried out by the air. The evaporation loss of the sample was determined from the difference in mass quality of the sample before and after heating. This instrument is suitable for lubricating oils and lubricating base oils.
Performance characteristics
1. Metal bath heating device, safe and environmentally friendly;
2. Import precision differential pressure gauge to ensure accurate pressure;
3. The bath body is added to Wood alloy for better heat conduction;
4, equipped with a special vacuum pumping system;
5, 7-inch color LCD touch screen display, automatic temperature control, timing alarm.
Automatic calculation of evaporation loss, storage of calculation results
6. Evaporation 坩埚 meets the requirements of ASTM standards;
7, precision pressure regulation system, imported needle valve to ensure accurate flow regulation.
8. There is a gas buffer bottle inside;
9. High-power solid state relay control heater;
10, imported temperature control table, precise control.
Technical Parameters
1. Applicable standards: SH/T0059
2, temperature control mode: digital display PID temperature control
3, temperature control range: normal temperature ~ 250 ± 0.1 ° C, accuracy 0.01 ° C
4, heating method: metal bath heating
5, pressure regulation: high precision needle valve
6, suction method: vacuum pump
7, differential pressure gauge: imported precision inclined tube differential pressure gauge