PT10001L additive storage tank

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The PT10001L additive storage tank is made of pure imported PE material, which has good corrosion resistance to various acids and alkalis. When designing the appearance of the PE medicine box, the designer also considers cleanliness and aesthetics. The streamlined appearance is not easy to get dirty and can easily remove dirt. A large PE medicine box is an economical and durable helper: the barrel body is integrally formed without adhesive joints, which is not easy to break. Heat and frost resistance: It has excellent heat and frost resistance and can be used at temperatures ranging from 80 to -40 degrees Celsius. The above is the complete introduction of the PE medicine box, with color classification and many colors available.

Product Details

Material:

PT10001L additive storage tankMade of imported LLDPE material and 100% new roll molded outdoor material, this material is produced in one roll molding process. It is very sturdy, resistant to oxidation, damage, and durability, as well as oxidation, sun, temperature, and freezing.

workmanship

As the rotational molding process is adopted, it can also be used for storage tanks of additives, cement additives, organic fertilizers, biogas slurry and liquid fertilizers, which have the advantages of no welding joint, no leakage, aging resistance, impact resistance and long service life. The advantages of integral molding, corrosion resistance, and long service life are particularly prominent. The water reducing agent storage tank can store the vast majority of inorganic acid, alkali, and salt solutions, which can replace materials such as stainless steel, titanium, nickel, and alloy steel. The product complies with the regulations for the storage and transportation of dangerous goods and is an ideal storage container for storing reactive chemical corrosion solutions and clean solutions.Product performance:

The small softening point of the plastic used in PE plastic storage tanks is 108 ℃, and the large fragmentation point is -70 ℃, so it can generally be used to hold liquids with temperatures ranging from -40 ℃ to 60 ℃. If the liquid density is heavy or the temperature is higher than 60 ℃, a steel lined plastic anti-corrosion storage tank should be used to prevent softening and deformation of the PE plastic storage tank. If PE plastic storage tanks are used for chemical reactions or dilution, corresponding tests should be conducted in advance to determine the temperature of the reaction or dilution.

PT10001L additive storage tankThere are also the following characteristics:

1. Formed using rotational molding process.
2. The material of the PE plastic storage tanks produced by the company is rolled plastic linear low-density polyethylene (LLDPE) or linear medium density polyethylene (LMDPE). PE plastic storage tanks can hold inorganic acids, alkalis, salts, and many organic substances at room temperature.

3. The inlet, outlet, level gauge port, flange, etc. on the tank body are all formed as a single piece without welding, and do not require additional inlet and outlet ports. When storing acidic and alkaline substances, acid and alkali resistant gaskets should be provided. When storing organic matter (especially organic solvents), prepare insoluble rubber gaskets.
4. It is also suitable for containing strong oxidants (such as sulfuric acid with a concentration of over 75% and nitric acid with a concentration of over 30% at a temperature of 60 ℃) and good organic solvents (benzene, ether, ketone, ester).