PPM htV formaldehyde detector imported from UK company PPM

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

PPM htV formaldehyde detector imported from the UK can quickly detect indoor formaldehyde concentration values, and customers can also choose different detection ranges according to their usage requirements. The PPM htV formaldehyde detector can not only detect formaldehyde in real-time, but also temperature and humidity.

Product Details

UK importsPPMcompanyPPM-htVFormaldehyde detector can quickly detect indoor formaldehyde concentration values, and customers can also choose different detection ranges according to their actual usage requirements.PPM-htVThe formaldehyde detector can not only detect formaldehyde in real time, but also detect temperature and humidity.

UK importsPPMcompanyPPM-htVFormaldehyde detector product introduction:

The PPM htV formaldehyde detector imported from the UK adopts advanced microelectronics and sensor technology, with humidity compensation function. Even in extreme environments with high temperature and humidity, the PPM htV formaldehyde detector can accurately measure formaldehyde concentration. The reading is displayed in ppm or mg/m3 units, and temperature and humidity can also be measured in real-time.

UK importsPPMcompanyPPM-htVFormaldehyde detectorProduct Features:

Not affected by extreme high temperature and humidity environments, with humidity compensation function

Formaldehyde unit display: ppm or mg/m3 (under standard conditions of 0 ℃ and 1 atmosphere)

Single key operation, capable of fast sampling and short recovery time

The standard configuration includes a formaldehyde calibration source (valid for six months), which can complete the calibration process in just a few seconds.

Randomly equip 10 benzene fen filters to eliminate the influence of phenol on readings.

Obtained ISO 9001:2000 quality certification and meets CE standards

UK importsPPMcompanyPPM-htVFormaldehyde detector product parameters:

sampling method	Collect 10ml air sample through built-in pump
sampling frequency	1-3 minutes (depending on the concentration previously collected)
response time	Low concentration for about 8 seconds, high concentration for about 60 seconds
Volume/Weight	150x80x34mm/270g with battery included

UK importsPPMcompanyPPM-htVFormaldehyde detector sensor:

sensor	PPM Company independently develops electrochemical sensors
Testing Scope	Basic range: 0.00~10.00ppm (or 0-13.4mg/m3) Choose a higher range: 20, 30, or 80ppm
resolution	0.01ppm (adjustable to 0.001 ppm)
precision	2% (based on 4-5 repeated measurements from 12 formaldehyde analyzers)
accuracy	According to NIOSH regulations in the United States, an acceptable measurement method is used to measure formaldehyde concentration of 0.3ppm in an environment with a relative humidity between 25-70%. The acceptable standard for NIOSH is that data results within the 95% confidence interval are within ± 25% of the true value. The PPM formaldehyde detector can meet NIOSH standards. ﹞

UK importsPPMcompanyPPM-htVFormaldehyde detector temperature and humidity module:

type	Interchangeable data CMOSens
scope	Temperature: -40 to+128 ° C Relative humidity: 0-100% RH
precision	Temperature: ± 0.4 ° C; Relative humidity: ± 3% RH Optional upgrade to ± 0.3 ° C, ± 1.8% RH
correction	Manufacturers calibrate according to ISO/IEC 17025, traceable to NIST and the UK National Physical Laboratory