PP-R pipe, cold water pipe is blue

PP-R pipe, cold water pipe is blue

characteristic:

Product Introduction of Type III Polypropylene (PP-R) Pipe RuLei brand PP-R pipe is a new type of ideal pipe made from imported high-quality raw materials and produced according to German standards DIN8077E and DIN8078. Suitable for cold and hot water supply facilities in civil buildings (such as residential buildings, hospitals, hotels, office buildings, schools, etc.); It can be widely used for the transportation of industrial and agricultural water, as well as other corrosive fluids such as waste mineral alkali water; It can also be used for conveying systems in air conditioning, solar water heaters, and swimming pool nets. Characteristics of Thunder brand PP-R pipe: 1. Cleanliness and hygiene: Transporting drinking water will not cause changes in taste and flavor, and the product fully complies with the hygiene requirements specified in GB/T17219-1998 national standard. 2. Easy installation and strong sealing: using hot melt connection, installation is time-saving, labor-saving, easy to learn, and the joint is sealed without leakage. 3. Lightweight and easy to install: with a specific gravity of only 1/8 of steel, it is easy to handle and install. 4. Thermal insulation and energy saving: The thermal conductivity is only 1/200 of steel, making it ideal for energy-saving hot water. 5. Stable flow rate: Smooth inner wall, no scaling, low conveying resistance, stable flow rate 6. Good environmental friendliness: Waste materials can be recycled and reused, and there is no pollution to the environment during production, construction, use, and after use.. 7. Pressure resistance, aging resistance, long service life: Compared with other plastic pipes, this product can withstand greater internal pressure, and has good aging resistance. Under normal conditions, the service life can reach more than 50 years.

Equal diameter straight through 20 25 32 40 50 63 75 90 110	45 ° elbow 20 25 32 40 50	90 ° elbow 20 25 32 40 50 63 75 90 110	Straight Tee 20 25 32 40 50 63 75 90 110
Equal diameter four-way 40 50 63	female elbow 20×1/2″ 25×1/2″ 25×3/4″ 32×1″	male elbow 20×1/2″ 25×1/2″ 25×3/4″ 32×1″	Internal thread elbow with seat 20×1/2″ 25×1/2″
External thread union 20×1/2″ 25×1/2″25×3/4″ 32×1″ 40×1.2″ 50×1.5″ Internal thread union 63×2″ 75×2.5″	Internal thread straight through 20×1/2″ 25×1/2″ 25×3/4″ 32×1″ 40×1.2″ 50×1.5″ 63×2″	External thread straight through 20×1/2″ 25×1/2″ 25×3/4″ 32×1″ 40×1.2″ 50×1.5″ 63×2″	Male branch tee 20×1/2″ 25×1/2″ 25×3/4″ 32×1″
Internal thread tee 20×1/2″ 25×1/2″ 25×3/4″ 32×1″	Pipe cap 20 25 32 40 50 63 75 90 110	All plastic pipe clamp 20 25 32 40 50 63 75	Iron pipe clamp 20 25 32 40 50 63 75 90 110
All plastic flexible joint 20 25 32 40	SUPPORT RING 40 50 63 75 90 110	Expansion joint 20 25 32 40 50 63 75 90 110	Cold water ball valve 20 25 32
stop valve 20 25 32 40 50 63	Curved tube 20 25 32	Reducer sleeve 25×20 32×20 32×25 40×20 40×25 40×32 50×20 50×25 50×32 50×40 63×20 63×25 63×32 63×40 63×50 75×40 75×50 75×63 90×40 90×50 90×63 90×75 110×50 110×63 110×75 110×90	reducing tee 25×20 32×20 32×25 40×20 40×25 40×32 50×20 50×25 50×32 50×40 63×20 63×25 63×32 63×40 63×50 75×40 75×50 75×63 90×50 90×63 90×75 110×63110×75 110×90

Technical parameters: