PP-R/PE hot and cold water pipe extrusion production line

NegotiableUpdate on 10/22

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Purpose: 1. The production line uses the high-efficiency single screw extruder developed by our factory, which has the characteristics of high-speed extrusion and high-efficiency plasticization

Product Details

Purpose:

1. The production line adopts the high-efficiency single screw extruder developed by our factory, which has the characteristics of high-speed extrusion and high-efficiency plasticization.

2. Barrier type two-stage mixing PP-R special screw, slotting machine barrel.

3. Configure a new type of secondary diversion mold with the characteristics of low-temperature and low-pressure extrusion; Water film sizing sleeve ensures high-speed production of pipes.

4. The production line is controlled by PLC programming and has a well-designed human-machine interface.

5. Optional identification extruder can be installed to produce colored marked pipes. The production line can replace molds and produce PE pipes.

Main technical parameters:

Unit model	SJPG-65	SJPG-90	SJPG-120
Main motor power (kw)	30	55-75	90
Heating power of barrel (kw)	23	34	48
aspect ratio	30:1	30:1	30:1
production capacity	80-100	120-150	200-220
Vacuum pump power (kw)	5.5	7.5	7.5
Pump power (kw)	4	4	4
Mobile motor power (kw)	0.75	0.75	0.75
Pump power (kw)	0.75	0.75	1.1
Traction motor power (kw)	5.5	7.5	7.5
Cutting motor power (kw)	2.2	2.2	3
inkjet printer	Imported inkjet printer
Installed power (kw)	72	110	160
Equipment layout length	30	36	42