PET and MS sheet production lines

Introduction to PET (Modified) Transparent Thick Plate

High mechanical strength, rigidity, and hardness. Good sliding performance and wear resistance, good electrical insulation. Very good dimensional stability,Good weather resistance and chemical resistance stability.

The PET thick plate is processed from ordinary APET raw materials and specially modified PET raw materials. Due to its superior cost-effectiveness, it can replace PC/PMMA/GPPS boards in various occasions such as construction, decoration, and advertising. Our equipment can produce 8mm thick APET and PETG sheets.

2. PET (modified) transparent thick plate production equipment

The PET thick plate extrusion production line developed by GWELL company currently has a shortage of equipment for producing this product in the market. PET thick plates have broad prospects in China. Compared to ordinary PET sheets, the maximum thickness can only reach 1.5mm, while PET thick plates can reach up to 5mm.

3. Production principle and characteristics of MS board

MS is a copolymer synthesized by extracting 50% polymethyl methacrylate (PMMA) and 50% styrene (PS) as the main raw materials. It is a modified product based on acrylic products, with various parameter properties between acrylic and PS boards. Simply put, MS board is a hybrid product of PMMA and PS, and it has similar characteristics to both products. Therefore, in some fields, it can replace some acrylic boards.

In the past two years, due to the continuous rise in oil prices, acrylic materials have been on the rise. Many manufacturers have chosen to process and replace acrylic products with MS boards, which are relatively inexpensive. Products made from MS boards can replace acrylic products in some fields, but if you want high transparency products, it is recommended to choose acrylic products.

4. Introduction to board production equipment