PDC-MG plasma cleaning machine

NegotiableUpdate on 03/15

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Plasma cleaning machines can enhance the adhesion, compatibility, and wettability of samples, as well as disinfect and sterilize them. Plasma cleaning technology has been widely applied in fields such as optics, optoelectronics, electronics, materials science, life sciences, polymers, biomedicine, microfluidics, etc

Product Details

Product Introduction:

PDC-MG plasma cleaning machineEquipped with various digital instruments, it can more accurately record various experimental parameters. This device is easier to operate and only requires one key to control the entire cleaning process. This model of plasma cleaning machine has higher RF power, making the application scope of plasma cleaning wider. In addition to ordinary cleaning functions, it also has functions such as surface modification, bonding, and shallow etching. Tested by the National Radiation Environment Management Monitoring Station, it meets the requirements of relevant national product standards.

Plasma cleaning machineTechnical Parameter：

Whole machine specifications	500 × 300 × 300 (length × width × height) mm
Whole machine weight	35 Kg
Cleaning cabin specifications	Φ 165 × L210 mm (heat-resistant glass)
Effective volume of cleaning compartment	4.5 L
Input power supply	220 V／50 Hz
Whole machine input power	400 W
RF OUTPUT	0-150 W (continuously adjustable)
rf frequency	13.56 MHz
Digital timer range	0～99.99 min
Ultimate vacuum	60 Pa
Digital vacuum gauge and range	1.0×102～9.9×105 Pa
Digital ammeter and digital voltmeter	Convenient to determine the power level of the device during operation
Gas flowmeter and range	Two float flow meters with a flow rate of 0.2-1.5 L/min, convenient for mixing two different gases in proportion
accessory	VRD-8 single-phase vacuum pump, one heat-resistant glass tray

VRD-8 type matched with PDC-MG plasma cleaning machineSingle-phase vacuum pumpImage:

真空泵

(All pictures are subject to the actual product)

Technical parameters of VRD-8 vacuum pump：

origin	Zhejiang, China
pumping speed	2.2 L/S
mbar	5x10-2
Water vapor capacity	360g/h
noise	56A
Ambient Temperature	10-40℃
Number of motor phases	single phase
Motor voltage	220V
Motor Power	0.37KW
motor speed	1440 r/min
weight	16.2kg
Oil consumption	0.5L
Vacuum system accessories	3 pipe clamps, 1 vacuum rubber hose (diameter 12 mm, length 2 m), 1 silicone rubber hose (diameter 6 mm, length 2 m), 1 vacuum pump inlet adapter, 1 roll of raw material tape, 1 change knife, 3 nylon zip ties

This vacuum pump is an export type vacuum pump, and its performance is much higher than other domestic vacuum pumps.