Mainly used for fixing mattresses and brown cushions on sofas.
P88-U type brown pad gun, suitable for use between brown felt and needle punched cotton on sofas and spring mattresses
Operation method:
This tool is suitable for door studs with a width of 11.9 and a height of 22mm
2. Pull the pusher to the end of the nail groove, place the door shaped nail into the nail groove, then push the pusher to its original position, connect the air source, and put the nail gun in standby mode
3. The air pressure used in this tool is 0.55MPa-0.8MPa. If the air pressure is too low, it will not achieve the desired effect. If the air pressure is too high, it will cause damage to the parts
In order to prevent dust from entering and ensure the cleanliness and dryness of the gun body, it is necessary to install an air purification pressure regulating device, which can not only prevent faults from occurring, but also extend its service life
5. The inner diameter of the gas pipeline should be 6-8mm, and the length should not exceed 3m. When the gas pipeline is too long, the air pressure drops sharply, resulting in poor working conditions,
6. Connect the quick connector (already installed at the factory) to the quick connector of the gas delivery pipe Before use, a small amount of clean light engine oil should be injected into the gun from the quick connect nozzle to lubricate the gun and extend its service life
P88-U Brown Blade Gun Operation Video: http://v.youku.com/v_show/id_XMTY4MTc5MDYw.html?from=y1.7 -2

Operating pressure: 0.55-0.8Mpa
Vulnerable parts are interchangeable with imported guns

