Overview: Installation position of Festo two position five way solenoid valve

NegotiableUpdate on 05/23

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Overview: The installation position of the Festo two position five way solenoid valve is $r $n $r $n. The solenoid valve model is VUVS-L25-M52-MD-G14-F8-1C1 $r $n. The high-speed valve can be directly used in the application site without additional protective measures. So, the very short pneumatic pipeline ensures a shorter signal path and high-speed response time. The $r $n high-speed valve MH increases the switching frequency and improves the process and workpiece quality with excellent repeatability accuracy.

Product Details

Overview: Installation position of Festo two position five way solenoid valve

Electromagnetic valve model: VUVS-L25-M52-MD-G14-F8-1C1

Plate valves always use an external pilot. Set the pilot air source through the air circuit board. The supply scope of the air circuit board for this purpose includes one short plug and one long plug.

The vertical pressure air source plate allows the valves installed on it to achieve intake and exhaust respectively.

If two air source plates are stacked on top of each other, the valve can achieve intake and exhaust independently of the valve island..

Valve size 26.5 mm

Standard rated flow rate (standardized according to DIN 1343) 1300 l/min

Work vent G1/4

Working voltage 24V DC

Working pressure 0.25 Mpa... 1 Mpa

Valve function two position five way, single stable state

Drive mode electronic control

Improve the output and utilization of machines. Excellent switching time and repetition accuracy ensure continuous and consistent process and workpiece quality, reducing product and rework.

The manual control device can open and close the valve without being electrically driven or powered off. Open and close the valve by pushing the manual control device. The rotating manual control device can also lock the set switch status.

A sturdy and reliable cover protects the manual control device locked onto the valve. Drive the valve through a button or locking manual control device (via accessories).

If possible, please use unlubricated compressed air as the working medium for the system equipment.

Used for plate valves 10A, 10, 14, and 18 • Air circuit board with M5, M7, G1/8, and G1/4 working air ports

• Used for 2x two position three-way, two position five way, and three position five way valves

Overview: Installation position of Festo two position five way solenoid valve