Original Rexroth servo motor MSK040B-0600 control module

REXROTH, Germany REXROTH, REXROTH oil cylinder, REXROTH hydraulic cylinder CDH1 Serie 3X KONFIG, REXROTH motor, REXROTH united plunger motor A A10F M 45/52W-VRC6N000-SO481, REXROTH pump, REXROTH axial plunger pump A A10V O 45, REXROTH valve, REXROTH hydraulic lift directional valve, REXROTH sensor, REXROTH pressure sensor, REXROTH accumulator, REXROTH bladder accumulator

REXROTH gear pump PGH-3X

German REXROTH pressure reducing valve, REXROTH gear pump, REXROTH gear pump R910942503

REXROTH proportional servo valve, REXROTH hydraulic cylinder, REXROTH plunger pump, REXROTH hydraulic pump, REXROTH plunger pump, REXROTH connecting wire R901290194, REXROTH solenoid valve, REXROTH linear motor, REXROTH slide valve, REXROTH pressure sensor, REXROTH synchronous servo motor MS2N series, REXROTH single axis control unit CSE02 series, REXROTH planetary gear HYDROTRAC GFT 8000 series, REXROTH hydraulic motor, REXROTH connecting wire R901290194, REXROTH solenoid valve, REXROTH linear motor, REXROTH Slide valve, REXROTH pressure sensor, REXROTH synchronous servo motor MS2N series, REXROTH single axis control unit CSE02 series, REXROTH planetary gear HYDROTRAC GFT 8000 series, REXROTH hydraulic motor

=====================================

Rexroth brand introduction

Rexroth was formed in 2001 by the merger of the former Bosch Automation Technology Department and the former Rexroth Corporation, becoming Bosch Rexroth Corporation. It is wholly owned by the Bosch Group but operates independently, providing industrial hydraulics, electronic transmission and control, hydraulic valves, solenoid valves, proportional valves, globe valves, linear transmission and assembly technology, pneumatic and hydraulic transmission services, as well as transmission and control solutions for walking machinery hydraulics. Bosch Rexroth from Germany is an expert in transmission and control. Rexroth provides transmission, control, and mobility solutions for customers in the fields of industrial and factory automation, mobile machinery, and renewable energy; As the common choice of over 500000 customers worldwide, Rexroth is continuously providing customers with high-quality electronic, hydraulic, pneumatic, and mechatronic integrated components and systems.

The main products of REXROTH in Germany include electrical transmission and control, assembly, gears, industrial hydraulics, linear motion, mobile hydraulic systems, forming and casting, fastening, and welding

REXROTH is committed to providing safe, precise, efficient, and cost-effective transmission and control technologies for various types of machinery and system equipment. REXROTH integrates global application experience, develops innovative products, and customizes system solutions and services for customers in every segmented market of walking machinery, mechanical applications and engineering, factory automation, and renewable energy. Bosch Rexroth also provides customers with various hydraulic, electronic transmission and control, pneumatic, gear, linear transmission, and assembly technologies.

REXROTH sports machinery, automotive industry, mining industry, oil and gas drilling (ground), stage technology, chemical industry, printing and paper processing, energy technology, material conveying, glass machinery manufacturing, rubber processing, semiconductor and electronics industry, woodworking industry, horizontal directional drilling rig, engine, plastic machinery and grinding machine, metallurgy, mining equipment, assembly and loading and unloading, dredgers, offshore engineering, processing and packaging, testing technology, recycling and waste disposal, ship engineering, motion simulation technology, solar energy, machine tools (cutting), hydraulic engineering, shield tunneling machines, metal forming machine tools and presses, conveying technology, fluid dynamics research, shipyard equipment, cement industry, sugar industry, pulp and paper machinery.Original Rexroth servo motor MSK040B-0600 control module

========================================

Rexroth Product Introduction

REXROTH Electromagnetic Directional Valve WE6 Series 4WE6J6X/EG24N9K4

Size 6

4/3, 4/2 or 3/2 directional design

High power solenoid valve

The transmission method according to DIN 24340 standard is Type A

According to the transmission mode of ISO 4401-03-02-05 and NFPAT3.5.1 R2-2002 D03

Wet needle DC or AC solenoid valve with detachable coil

The electromagnetic coil can rotate 90 degrees

The coil can be changed without opening the pressure sealed chamber

Electrical connections as individual or central connections

Manual operation, optional

Valve core position monitoring, optional smooth switch feature

CSA certified part numbers for all sizes

WE type directional valve is an electromagnetic directional spool valve. They control the start, stop, and direction of traffic. These directional valves are basically composed of a housing, one or two solenoid valves, a control spool, and no/one or two reset springs. Complete coils can be implemented within the program under changes in circuits and electrical connections. The flow and pressure rates range from 4000 PSI to 5000 PSI and from 21 GPM to 32 GPM, covering a wide range of applications.

Model: 4WE6J6X/EG24N9K4

R900561288

Four main ports

High power wet needle solenoid valve with detachable coil

Voltage: DC voltage 24V

Hydraulic oil temperature range: -30...+80 ° C; -22...+176 ° F (NBR seal)

-15.+80 ° C; -4...+176 ° F (FKM seal)

Viscosity range: 2.8... 500 mm2/s; 35...2320 SUS

With hidden manual operation (standard)

Electrical connection: No mating connectors, with connectors that comply with DIN EN 175301-803

Installation: Anywhere

Environmental temperature range: -30...+50 ° C; -22...+122 ° F (NBR sealed)

-20...+50 ° C; -4...+122 ° F (FKM seal)

Weight:

-1.45kg, 3.2 lbs with an electromagnetic valve

-Valve with two solenoids weighing 1.95kg and 4.3 lbs

------------------------------------

REXROTH steering oil pump AZPF series, AZPN series AZPF-12-022RCB20KB

AZPF - Size 4 to 28 cc; AZPN - Size 20 to 36 cc

Sliding bearings for high load applications

Drive shafts that comply with ISO or SAE and customer specific standards

Possible combinations of pumps

The transmission shaft is SAE or ISO

Wide configuration range

Series and multi pump configuration

Line connection: Connect flanges or threads

The external gear pump is basically composed of a pair of bearing bushings supporting the gear, a front housing, and a rear cover. The drive shaft protrudes from the front cover with a shaft sealing ring. The bearing force is absorbed by a special bearing liner with sufficient elasticity to produce surface contact instead of line contact. They also ensure excellent wear resistance, especially at low speeds. The gear has 12 teeth, which reduces both flow pulsation and noise to a very low level.

Original Rexroth servo motor MSK040B-0600 control module

Model: AZPF-12-022RCB20KB

hydraulic system

Traffic: 4.0 ..28.0 cm3/rev

Nominal pressure: 280 bar

Standard bearings

Rotation direction: Right

Drive shaft: 9T spline, SAE J74416-49T

Front flange: Square flange

Linear connection: rectangular flange

Sealing: NBR, shaft seal is FPM

End cap: Standard

REXROTH steering oil pump AZPF series, some models of AZPN series

AZPF-10-004RQR12MB、AZPF-11-005RQR12MB、AZPF-11-008RCB20MB

AZPF-11-008RQR12MB、AZPF-11-011RCB20MB、AZPF-12-004RCB20KB

AZPF-12-004RQR12MB、AZPF-12-004RRR12MB、AZPF-12-005LRR12MB

AZPF-12-005RQR12MB、AZPF-12-005RRR12MB、AZPF-12-008LRR12MB

---------------------------------------

REXROTH slider lubricant Dynalub 510 Dynalub 510 R341603700

Dynalub510 is an NLGI Class 2 lithium soap based high-performance grease specifically developed for linear motion systems. It is worth noting that it provides excellent water resistance and corrosion prevention, and is suitable for use at temperatures between -20 ℃ and 80 ℃. The range of micro products uses Dynalub520. When an eLINE ball guide sleeve is subjected to a load of 20% of its rated dynamic load, under the test conditions, the use of lubricating grease can achieve a lifespan of 3000 kilometers. If lubrication is replenished every 3000 kilometers, its lifespan can reach 12500 kilometers.

Model: Dynalub 510 R341603700

Consistency grade (according to DIN51818): 2

Temperature range: -20 ℃ to+80 ℃

Application scope: Shaft diameter ≥ 8mm

-20 ℃ flow pressure: ＜ 1400 hPa

Melting point:>165 ℃

Weight: 400g

------------------------------------

REXROTH pressure switch HED 8HED8 OP-2X/100K14AS; HED8 OP-2X/

Bottom plate installation

Can be used for pipe installation

Vertically stacked components, with port positions in accordance with DIN 24340 form A

Horizontal stacking component

Five pressure levels to choose from

Adjustment options:

With scale knob

Cable socket with circuit (indicator light)

Spindle with/without protective cover

Spindle with scale, with/without protective cap

Lockable knob with scale

The HED 8 piston pressure switch is used to monitor a pressure value in the circuit. When the pressure value changes (up or down), the HED micro switch changes state and can be used as an indicator. So, the HED microswitch is not a current carrying tool, it is an actuator/sensor.Original Rexroth servo motor MSK040B-0600 control module

型号： HED8OP-2X/100K14AS

HED8OP-2X/200K14AS

Installation: Plate installation

Pressure rating: 100bar, 200bar

Electrical connection:

According to DIN EN175301-803, connect separately with the connector

Large cube connector

---------------------------

REXROTH valve 563 131 series 5631310100

The outer surface of the lift valve is located inside each corresponding hydraulic fluid supply port, and each port is connected to the variable displacement pump. A directional valve is a directional control valve with two or more flow forms and two or more oil ports. It is a valve that enables communication, cutting off, and directional control of hydraulic oil flow, as well as pressure unloading and sequential action control. The directional valve has multi-directional adjustable channels, which can change the fluid flow direction in a timely manner. When working, the drive shaft is rotated by the drive transmission mechanism outside the valve, with a shaking crank arm, to activate the valve plate, so that the working fluid sometimes flows from the left inlet to the lower outlet of the valve, and sometimes changes from the right inlet to the lower outlet, achieving the purpose of periodic flow direction change.

Rexroth was formed in 2001 by the merger of the former Bosch Automation Technology Department and the former Rexroth Corporation, becoming Bosch Rexroth Corporation. It is wholly owned by the Bosch Group but operates independently, providing industrial hydraulics, electronic transmission and control, hydraulic valves, solenoid valves, proportional valves, globe valves, linear transmission and assembly technology, pneumatic and hydraulic transmission services, as well as transmission and control solutions for walking machinery hydraulics. Bosch Rexroth from Germany is an expert in transmission and control. Rexroth provides transmission, control, and mobility solutions for customers in the fields of industrial and factory automation, mobile machinery, and renewable energy; As the common choice of over 500000 customers worldwide, Rexroth is continuously providing customers with high-quality electronic, hydraulic, pneumatic, and mechatronic integrated components and systems.

Working pressure range: 0 bar/10 bar

Environmental temperature range: -25 ° C/+80 ° C

Medium temperature range: -25 ° C/+80 ° C

Medium: Compressed air

Particle size: 50 μ m

Oil content in compressed air: 0 mg/m3... 5 mg/m3

Operating element: Handle with positioning

Sealing principle: Soft seal

Shell: Die cast zinc

Sealing: Acrylic gum

Operating element: polyamide

--------------------------------

REXROTH respirator TLFII4-50H10XL-S00-000-00M00

Detachable filter housing, internal ventilation, replaceable filter element;

The filter element H10XL has a filtration grade of up to 10 μ m;

Fiberglass felt and paper pads up to 25 microns in size.

Design

TLF I...: Internal screw in thread

TLF II...: External screw in thread

TLF III...: External screw in thread and filling filter (sieve basket 130 microns)

application

Industrial system suction air filtration and dehumidification

Avoid initial damage to pumps, bearings, and system components

Model: TLFII4-50H10XL-S00-000-00M00

No flange

Size: 4-50

Rated filtration: Absolute (ISO16889)

Maximum flow rate: 80000 l/min

Micro glass, non removable

Sealing: NBR

Working temperature: -20 ℃ to+100 ℃

Weight: 2.3kg

----------------------------------

REXROTH directional valve WE10 series 4WE10C-3X/CG24N9K4

Size 10

For the installation of the base plate:

According to ISO4401-5 port mode, NFPA T3.5.1M R1 and ANSI B93.7e05

Wet pin AC or DC electromagnet

Electromagnetic strip with detachable coil

As a separate or central electrical connection

Optional spool position monitoring (RE24830)

Smooth switching feature

All sizes are available with CSA certified part numbers

Electromagnetic directional spool valve controls start, stop, and direction. The basic structure of these directional valves is the housing; One or two solenoids; Control valve core; There is no/one or two reset springs. The full array of spools includes possible variations in voltage and electrical connections, all of which are included in this program. The flow and pressure rates range from 4000 PSI to 5000 PSI, and from 21 GPM to 32 GPM, covering a wide range of applications.

Model: 4WE10C-3X/CG24N9K4

Part number: R900593277

Port: 4 main ports

Component series: 30... 39 (30... 39: unchanged installation and installation dimensions)

Maximum working pressure: 315 bar

Maximum flow rate: 120 l/min [31.7 US gpm]

Viscosity range: 2.8... 500mm2/s [35... 2320 SUS]

Installation: Anywhere

Environmental temperature: -30...+50 ° C [-22...+122 ° F] (NBR seal)

-20...+50 ° C [-4...+122 ° F] (FKM seal)

Partial models of WE10 series:

3WE10A3X/CG24N9K4、4WE10C3X/CG12N9K4、4WE10C3X/CG24N9K4、4WE10C3X/CW110N9K4、4WE10C3X/OFCG24N9K4、4WE10C4X/CG12N9DA、4WE10C4X/CG24N9DA、4WE10C4X/CW110N9DA、4WE10C4X/OFCG12N9DA、4WE10D3X/CG12N9K4、4WE10D3X/CG24N9K4、4WE10D3X/CG24N9K4、4WE10D3X/CW110N9K4、4WE10D3X/CW110N9K4、4WE10D3X/OFCG12N9K4、4WE10D3X/OFCG24N9K4、4WE10D3X/OFCW110N9K4、4WE10D3XCG24N9K72LAN、4WE10D3XOFCG24N9K72LAN、4WE10D4X/CG24N9DA、4WE10D4X/CG24N9DAL、4WE10D4X/CW110N9DA、4WE10D4X/CW110N9DAL、4WE10D4X/CW110N9DAL=CSA、4WE10D4X/OFCW110N9DA、4WE10D4X/OFCW110N9DAL、4WE10D4X/OFCW110N9DK25L、4WE10D5X/EG24N9K4/M、4WE10D5X/EG24N9K4/V、4WE10D5X/OFEG24N9K4/M、4WE10E3X/CG12N9K4

--------------------------------------------

REXROTH plug R900057453

-Cooperate with connectors and cable components for electrical connections, such as:

solenoid valve

Valve with electronic installation

Position and pressure sensors

-Different designs and standards

-Plastic and metal versions

In hydraulic systems, connectors and cable components are used in conjunction with valves and sensors

According to EN175301-803 and ISO4400

2-pin+PE, "large cube connector"

R900057453 mating connector for one or two coils (single connection) valve

with indicator light

Voltage: 12... 240V

Current: 3A

Color: Black

Accessories: NPT 1/2 '

Polarity: 2+PE

Maximum cross-sectional area: 1.51 mm2

Indicator light: LED yellow

Connection type: connection screw

Environmental temperature standard: -40 to+125 ° C

With indicator light/rectifier: -20 to+60 ° C

-----------------------------------

REXROTH plunger pump A4VS0 series A4VS0125MA/30R-PPB13N00

feature

The axial piston pump is designed with an inclined plate and operates in an open circuit with a static hydraulic drive

The flow rate is proportional to the input driving speed and displacement

It is possible to infinitely change the output flow by adjusting the angle of the rotating inclined plate

Excellent oil absorption properties

low noise

long service life

modular design

Short response time

Wide range of driver options available

Visual swing angle indicator

Optional installation location

Model: A4VS0125MA/30R-PPB13N00

Size: 125

Displacement: 125cm3/rev

Speed: 1800rpm

Flow rate: 225L/min

Power: 131kW

Torque: 696Nm

Control equipment: manual operation

Hydraulic fluid: mineral oil and HFD fluid

Sealing: NBR (Nitrile Rubber)

Shaft seal FKM (fluororubber)

------------------------------

REXROTH 液压缸 CDL2CDL2MP5/160/100/295D10/B11CFUMWW

Bosch Rexroth's new CDL2 rolling mill type oil cylinder meets the requirements of two pressure ranges, 160 and 250. They are designed specifically for 2 million load cycles. Design engineers can accurately calculate the lifecycle of each application cylinder and ensure transparency in the price/performance ratio. Four different installation types and a stroke of up to 3000 millimeters cover a wide range of applications, such as the wood and paper industry, ordinary mechanical structures, as well as recycling and material handling. However, the impact of harmful environmental factors, such as aggressive fine particles, steam, high temperatures, as well as the deterioration of pollutants and hydraulic fluids, should be avoided. The new CDL2 rolling mill type oil cylinder series has been supplemented with Rexroth hydraulic components and complete hydraulic systems.

Rated pressure: 250 bar

Piston diameter: 40... 200mm

Piston rod diameter: 25... 125mm

Installation methods: Four types

Maximum travel length: 3000mm

Maximum operating speed: 0.5m/s

Environmental temperature: -20...+80 ℃

-----------------------------

REXROTH Chain, Chain Wheel REXROTH

The performance of REXROTH chains and sprockets is very stable, achieving a high chain tension of up to 1250N and high tensile strength. Even small components can be easily transported through the almost enclosed chain surface. The wide selection of standardized curves and arcs for both vertical and horizontal transportation has opened up new possibilities for planning and implementation. REXROTH chains and sprockets are suitable for various conveyor systems, with a compact design, smooth operation, and easy replacement. Various types of chains are used to optimize the transportation of any material. Moreover, excellent materials enable them to be used in harsh environments with the presence of oil, dirt, or cutting chips.Original Rexroth servo motor MSK040B-0600 control module

Chain mode

Flat chain, wedge chain, wrapped steel chain, ESD chain

Static friction chain, stacked roller chain, roller wedge chain, universal chain

Applied to metal workpieces, electronic components, cosmetics, food, packaging industries, etc

Model recommendation

REXROTH Chain R418012706

REXROTH Chain Wheel R418002746

-------------------------------

REXROTH 座阀 M-3SED10UK1X/350CG24N9K4

The SED and SEW directional control valves are direct (SED) or rod (SEW) driven electromagnetic driven directional seat valves. They control the direction of start, stop, and fluid flow. Seat valves provide an application where line contacts are closed, and leakage or blockage of the slide valve is not advisable.

Product features

When moving in, the blocked port has no leakage

Electromagnetic strip with detachable coil

The pressure sealed chamber does not need to be opened to change the coil (type SED)

When the pressure pauses for a long time, the switch is reliable

The electromagnetic coil can rotate 90 degrees left and right

Electrical connections can be connected individually

Implicit manual emergency operation optional

Sensing position switch and proximity sensor (contactless and floating)

M-3SED10UK1X/350CG24N9K4

Product Code: R900051053

3 main ports

DC voltage 24V

Operating pressure: 350bar

Sealing: NBR

Weight: 2.6kg

Environmental temperature: -30...+50 ℃

Hydraulic fluid temperature range: -30...+80 ℃

Maximum flow rate: 40l/min

Viscosity range: 2.8 to 500mm2/s

Power compensation: 30W

------------------------------

REXROTH pressure switch HEDE10A1-2X/250K41G24/2/V

characteristic

- Suitable for measuring pressure in hydraulic systems and converting measured values into electrical signal variables

- With EMC performance, this pressure converter can also be used in harsh electromagnetic environments

Ceramic sensors/capacitive sensors

- Connecting cable with 4-pin M12 plug on the shell

- Accuracy level 1.0

- Thread connection G1/4

- Components in contact with the medium are made of stainless steel, ceramic, or FKM

- Compact design

- Two conversion outputs

Component series: 2X

Working voltage: 18 .. 36 VDC

Output signal: 250 mA

Pressure range: 0 .. 100/250/400/600bar

Set time (10... 90%):<3 ms

Temperature coefficient:<0.2/10 K%

Hydraulic oil temperature range:? 25 . .. +80℃

Surrounding temperature range: -20 .. 80℃

Electrical connection: M12 plug

----------------------------

REXROTH liquid level switch ABZMS-41-1X/0800/M2/DC-K24

Liquid level contact:

The slide tube contains adjustable spring contacts (normally closed and normally open), which are converted by magnets installed inside the float. If the oil level drops and the float reaches the transition point, the contact is controlled by a magnet. The valve core position of the contact remains unchanged until the oil level rises and the float exceeds the transition point again. The conversion points in the device can be adjusted. The switching function can be changed by rotating the contact 180 °; Normally closed contacts will become normally open contacts, and vice versa.

Temperature contact:

At a very low point inside the slide tube, attach the bimetallic temperature contact to the board and protect it with a shrink tube (this program can also be used on models with temperature sensor PT100 and resistance thermometer, as well as 4-20 mA analog output). If the desired temperature transition point is reached, the bimetallic contacts will open or close.

ABZMS-41-1X/0800/M2/DC-K24

Component series: 1X

Length: 800mm

Number of normally closed/normally open liquid level contacts: 2X

Voltage: 10... 36VDC

Electrical connection: 4-pole connector, M12x1 (standard)

Display range: -0 to+120 ℃

Maximum ambient temperature: -20 to+70 ℃

Conversion point: 4 programmable conversion outputs (2 liquid level outputs+2 temperature outputs)

Shell design: PA, IP65 (anti-static)

---------------------------------

REXROTH Valve CD07 Series 5776275302

The directional valve realizes the communication, cutting off, and directional change of hydraulic oil flow, as well as pressure unloading and sequential action control. The so-called two position switch, which refers to two positions of the switch, and five way switch, which refers to five inlet and outlet holes, are common directional components. It has multi-directional adjustable channels that can change the fluid flow direction in a timely manner. When working, the drive shaft is rotated by the drive transmission mechanism outside the valve, with a shaking crank arm, to activate the valve plate, so that the working fluid sometimes flows from the left inlet to the lower outlet of the valve, and sometimes changes from the right inlet to the lower outlet, achieving the purpose of periodic flow direction change.

application

Widely used in petroleum and chemical production

Note:

The pressure point must be at least 15 ℃ lower than the ambient and medium temperature, and a very high temperature of 3 ℃ is allowed

The oil content of compressed air must remain constant throughout its entire service life

Installation method: slide valve, zero cover

Pioneer: Internal

Sealing: Soft seal

Working pressure: 2 bar... 10 bar

Control pressure: 2 bar... 10 bar

Environmental temperature: -25 ℃... 50 ℃

Medium temperature: -25 ℃... 50 ℃

Medium: Compressed air

Particle size: maximum 50 μ m

Oil content in compressed air: 0 mg/m3... 1 mg/m3

Compressed air connection: compliant with ISO 228-1 standard

Equipped with controlled airflow exhaust device

Standardized circuit interface: EN 175301-803:2006

Reverse polarity protection

material

Shell: Die cast zinc; Polyamide (nylon), reinforced with fiberglass

Sealing: Acrylic gum

5610224510: Proportional valve (2V1)

-----------------------------------

REXROTH plunger pump A10V (S) OA10VS0100DFR1

characteristic

-Variable displacement pump with axial piston inclined disc design, used for open circuit static hydraulic actuators

-Driving speed and displacement proportional to flow rate

-The flow rate can be adjusted to achieve stepless variation by adjusting the angle of the inclined plate

-2 oil drain ports

-Excellent oil absorption properties

-Low noise

-Long service life

-Power to weight ratio

-Multi functional controller range

-Short control time

-By driving suitable gear pumps and axial piston pumps to achieve the same size, i.e. 100%

Slant plate design, variable

Nominal pressure: 4000psi (280bar)

Maximum pressure: 5100psi (350 bar)

Operation type: Open circuit

Rotation direction: clockwise

Sealing: FKM (Fluororubber)

------------------------------

REXROTH operation direction guide valve 4WH6D5X/V

Product features

-Fluid driven 4/3, 4/2, and 3/2 directional valves

-Direct acting directional slide valve

-Startup type:

Air pressure (WP, WPZ)

Hydraulic (WH, WHZ)

-According to the DIN24340 standard port mode (without positioning holes)

-According to ISO4401-03-02-05 and NFPA T3.5.1R2-2002 D03 standards for port mode (with locating holes)

-Bottom plate optional

-Inductive position switch and proximity sensor (non-contact)

Main ports: 4

Starting method: hydraulic

Connection: Radial connection

Component series: 50... 59 (installation and connection dimensions cannot be changed)

Fixture length: 42mm

Sealing material: FKM

No throttling plugin

----------------------------

REXROTH thermostat AB31-14/1-1A

By using a temperature sensor to automatically sample and monitor the ambient temperature in real-time, the control circuit is activated when the ambient temperature exceeds the set control value, and the control hysteresis can be set. If the temperature is still rising, the over limit alarm function will be activated when it reaches the set over limit alarm temperature point. When the controlled temperature cannot be effectively controlled, in order to prevent equipment damage, the tripping function can be used to stop the equipment from continuing to operate. Mainly used in various high and low voltage switchgear, dry-type transformers, box type substations, and other related temperature applications in the power sector.

REXROTH thermostat AB31-14/1-1A

--------------------------------------

REXROTH main lifting motor A2FM200/63W-VAB010

Standard motor

Supporting equipment:

Back pressure valve can be installed

Option: Integrated pressure reducing valve

Option: Integrated or built-in flushing and boosting pressure valve

Suitable for use as a pump in a closed circuit

Provide long-life bearings (specifications 250-1000)

The REXROTH axial piston unit provides a slanted shaft design or slanted plate design for pumps and motors in the medium to high pressure range. They are the main components of static hydraulic transmission. The significant advantages of compact size and high power density, economy, and reliability make them suitable for high-speed and high torque demands, while also meeting efficiency requirements.

Nominal pressure: 400bar

Peak pressure: 450bar

Displacement: 200cm3

最大速度： 2750rpm

Flow rate: 550l/min

Torque: 1114... 1273Nm

Weight: 66kg

-------------------------------

REXROTH proportional valve 4WRKEREXROTH proportional valve 4WRKE

This 4WRKE is a pilot operated proportional directional valve with main spool position feedback. The onboard electronic component (OBE) has a 7-pin connector for command, as well as valve core feedback and 24V power supply. The overlapping spool has a fault safe position centered on a spring. 4WRKE is commonly used in open-loop applications, and more importantly, it has high repeatability and is also widely utilized in elevator, transportation, or clamping applications.

Product features

Size 25

Port mode ISO4401-8; NFPA T3.5.1M R1; ANSI B93.7 D09

Control the direction and magnitude of flow through simulated commands

Main valve core position feedback for low hysteresis

Overlapping valve core

Integrated amplifier

4WRKE 16 W8-200L-3X/6EG24ETK31/A1D3M+4WRAP6 W7-04-30/G24K4/M

Rated flow: 200

Curve form: linear

Component series: 30... 39

Electronic connection: According to DIN EN 175201-804

Electronic interface: ± 10 V of set value/actual value

Sealing: NBR

-------------------------------------

REXROTH plug-in valve LC... DBLC16DB20E-7X/-004

The two-way plug valve used for pressure control function is a pilot lift valve and a slide valve. The main component design is to insert a plug valve into the chamber of DIN ISO7368 standard (which is a chamber sealed by a control cover). Pilot valves are used for manual or electric proportional pressure control and are integrated into or installed on control covers as pilot valves with interface connections. The function of pressure relief can be achieved by connecting the plug-in valve with different control covers.

The valve core structure is simple, the action is sensitive, and the sealing performance is good. Its main function is to achieve the connection or disconnection of the hydraulic circuit. When used in combination with ordinary hydraulic control valves, it can control the direction, pressure, and flow of the system oil. Plug in valves have been widely used in various construction machinery, material handling machinery, and agricultural machinery. In the often overlooked industrial field, the application of plug-in valves is constantly expanding. Especially in many situations where weight and space are limited, traditional industrial hydraulic valves are powerless, while plug-in valves have shown great potential. In certain applications, plug-in valves are a choice for improving productivity and competitiveness.

LC16DB20E-7X/-004，R900927483

Nominal size: 16

Work pressure: 420 bar

Flow rate: 300l/min

Recommended models in the same series

LC63DB20E-7X/104，R900959802

Nominal size: 63

Work pressure: 420 bar

Flow rate: 2500l/min

-----------------------------------

REXROTH Proportional Valve DBETE&DBETDBETE-6X/315G24K31A1V

characteristic

-Directly operated valves are used to limit system pressure

-Activated by proportional electromagnet

-Proportional electromagnet with central thread and detachable coil

-For baseboard installation: Enter port mode ISO4401-03-02-05

-DBTTE Integrated Electronic Components (OBE)

The instruction value/pressure characteristic curve has low manufacturing tolerances

-DBET electronic external control

Modular design, European card format amplifier, and as a plug-in amplifier

Up and down ramps are independently adjustable

Fine tuning command value/pressure characteristic curve

DBETE-6X/315G24K31A1V

Material Number: R901029969

Pressure: Maximum 315 bar

Integrated electronic power supply voltage (OBE): 24VDC

No matching connector, with plug assembly, according to DIN EN175201-804 standard

Electronic interface: Command value 0~10 V

Sealing: FKM

---------------------------------

REXROTH Hydraulic Cylinder CDL2 Series

A hydraulic cylinder is generally composed of a cylinder body, a cylinder rod (piston rod), and a seal. The interior of the cylinder body is divided into two parts by the piston, each with an oil hole. Due to the small compression ratio of the liquid, when oil enters one of the oil holes, the piston will be pushed to release oil from the other oil hole, and the piston will drive the piston rod to make an extension (retraction) motion, and vice versa.

Product model and number: R407999222 CDL2MP5/160/100/295D10/B11CFU MWW

Cylinder type: cylindrical

Hole diameter range: 25 to 200mm

Maximum pressure range: 160bar

-------------------------------

REXROTH sealing component CDL2.160/100M

Hydraulic cylinder sealing components are mainly used to prevent hydraulic oil leakage and have good sealing performance; Low frictional resistance; Seals have good oil resistance, corrosion resistance, and wear resistance; Long service life, wide temperature range, easy assembly and disassembly.

Product model and number: R961008614 DICHTUNGSSATZCDL2.160/100M

Hole diameter: 160mm

Piston rod diameter: 100mm

Material number: R961008614

---------------------------------

REXROTH single acting cylinder CCI series

The CCI series compact piston rod cylinder is a single acting cylinder with elastic pneumatic buffering function, which can achieve smoother performance in various applications.

CCI's design provides standard packaging with multiple sizes and mounting variants. Single acting and double acting types offer various variations, such as external or internal threaded piston rods, single or double rod end versions, hollow piston rods, torsion protection, high-temperature versions, and metal rod scrapers.

All compact cylinders in the CCI series comply with the ISO 21287 standard - this directive establishes a metric series of single rod pneumatic compact cylinders with inner diameters ranging from 20mm to 100mm, capable of operating at a working pressure of 1000 kPa (10 bar), with or without magnetic function.

Performance characteristics

The dew point pressure must be at least 15 ° C lower than the ambient and medium temperature, and must not exceed 3 ° C. The oil content of air pressure must remain constant throughout its lifecycle.

Only use engine oil approved by Bosch Rexroth.

ATEX certified cylinders can be generated in the Internet configurator.

ATEX ID II 2G2D c T4 T135°C -20°C ≤Ta ≤60°C。

Technical Specifications

Minimum/maximum work pressure. 1.5 bar/10 bar

Minimum/maximum ambient temperature. -20°C/+80°C

Minimum/maximum temperature of the medium. -20°C/+80°C

Material

Aluminum cylinder tube, anodized treatment

Stainless steel piston rod

Aluminum front cover

End cap aluminum

Polyurethane sealing

polyurethane scraper

========================================

Rexroth product model:

Hydraulic cylinder CDH1 Serie 3X KONFIG

Piston motor A A10F M 45/52W-VRC66N000-SO481

A10FM

Axial piston pump A A10V O 45

Hydraulic lifting directional valve 4SEC6E2X/G24N9K4

Pressure sensor HM 20-2X/010-C-K35-N

Bag type accumulator HAB1-350-6X/0G05G-3N111-BA

REXROTH Hydraulic Gear Pump AZPF-12-004RCB20KB

REXROTH synchronous servo motor MS2N07-C0BNN-CML1-NNNN-NN

REXROTH AC Welding Controller PST600E

REXROTH ball slider KWD-015-FN-S-C1-H-1

REXROTH Chain and Chain Wheel R418012706

REXROTH Chain R418012706

REXROTH Chain Wheel R418002746

REXROTH servo controller HCS02.1E-W0012-A-03-NNN

REXROTH proportional valve control board VSPA1

REXROTH overflow valve DBD series DBDS10P18-400

REXROTH Proportional Valve DBE6X Series CA10L-PC6152-PC0340E

REXROTH gear pump PGF series PGF2-2X/006RE01VE4

REXROTH pump PVV series PVV51-1X/162-027RA15UUMC

R900723634 PVV41-1X/098-018RA15DDMC

REXROTH Proportional Valve ED02 Series R414002403

REXROTH casing R0672 series R0672-216-40

REXROTH Check Valve SV&SL Series SV10PA1-4X/, SV30PA2-4X/

R900483369，SV10PA1-4X/

R900599456，SV30PA2-4X/

REXROTH servo tester VETSY-1-1X/1-2-1-1-1

REXROTH 齿轮泵 PGHPGH4-3X/040RE11VU2

REXROTH proportional directional valve 4WRAE6 W1-30-22/G24K 31/F1V

REXROTH servo motor MDDMDDMDD112C-N-030-N2M-130GA3

R414002400：8 bar

R414002401：8 bar

R414002402：8 bar

R414002403：8 bar

R414002410：12 bar

R414002411：12 bar

R414002412：12 bar

R414002413：12 bar

MDD112B-N-030-N2L-130GA0、MDD065B-N-040-N2L-095GBO、MDD065B-N-040-N2M-095GBO、MDD112D-N-030-N2L-130GAO、MDD112C-N-030-N2L-130GAO、MDD112D-N-020-N2L-130GA3

REXROTH Electromagnetic Directional Valve WE6 Series 4WE6J6X/EG24N9K4

REXROTH steering oil pump AZPF series, AZPN series AZPF-12-022RCB20KB

AZPF-10-004RQR12MB、AZPF-11-005RQR12MB、AZPF-11-008RCB20MB

AZPF-11-008RQR12MB、AZPF-11-011RCB20MB、AZPF-12-004RCB20KB

AZPF-12-004RQR12MB、AZPF-12-004RRR12MB、AZPF-12-005LRR12MB

AZPF-12-005RQR12MB、AZPF-12-005RRR12MB、AZPF-12-008LRR12MB

REXROTH slider lubricant Dynalub 510 Dynalub 510 R341603700

REXROTH pressure switch HED 8HED8 OP-2X/100K14AS; HED8 OP-2X/

REXROTH valve 563 131 series 5631310100

REXROTH respirator TLFII4-50H10XL-S00-000-00M00

REXROTH directional valve WE10 series 4WE10C-3X/CG24N9K4

3WE10A3X/CG24N9K4、4WE10C3X/CG12N9K4、4WE10C3X/CG24N9K4、4WE10C3X/CW110N9K4、4WE10C3X/OFCG24N9K4、4WE10C4X/CG12N9DA、4WE10C4X/CG24N9DA、4WE10C4X/CW110N9DA、4WE10C4X/OFCG12N9DA、4WE10D3X/CG12N9K4、4WE10D3X/CG24N9K4、4WE10D3X/CG24N9K4、4WE10D3X/CW110N9K4、4WE10D3X/CW110N9K4、4WE10D3X/OFCG12N9K4、4WE10D3X/OFCG24N9K4、4WE10D3X/OFCW110N9K4、4WE10D3XCG24N9K72LAN、4WE10D3XOFCG24N9K72LAN、4WE10D4X/CG24N9DA、4WE10D4X/CG24N9DAL、4WE10D4X/CW110N9DA、4WE10D4X/CW110N9DAL、4WE10D4X/CW110N9DAL=CSA、4WE10D4X/OFCW110N9DA、4WE10D4X/OFCW110N9DAL、4WE10D4X/OFCW110N9DK25L、4WE10D5X/EG24N9K4/M、4WE10D5X/EG24N9K4/V、4WE10D5X/OFEG24N9K4/M、4WE10E3X/CG12N9K4

REXROTH plug R900057453

REXROTH plunger pump A4VS0 series A4VS0125MA/30R-PPB13N00

REXROTH 液压缸 CDL2CDL2MP5/160/100/295D10/B11CFUMWW

REXROTH Chain, Chain Wheel REXROTH

REXROTH 座阀 M-3SED10UK1X/350CG24N9K4

REXROTH pressure switch HEDE10A1-2X/250K41G24/2/V

REXROTH liquid level switch ABZMS-41-1X/0800/M2/DC-K24

REXROTH Valve CD07 Series 5776275302

REXROTH plunger pump A10V (S) OA10VS0100DFR1

REXROTH operation direction guide valve 4WH6D5X/V

REXROTH proportional valve 4WRKEREXROTH proportional valve 4WRKE

REXROTH main lifting motor A2FM200/63W-VAB010

REXROTH plug-in valve LC... DBLC16DB20E-7X/-004

REXROTH Proportional Valve DBETE&DBETDBETE-6X/315G24K31A1V

REXROTH thermostat AB31-14/1-1A

REXROTH Hydraulic Cylinder CDL2 Series

REXROTH sealing component CDL2.160/100M

REXROTH single acting cylinder CCI series

3WE10A3X/CG24N9K4、4WE10C3X/CG12N9K4、4WE10C3X/CG24N9K4、4WE10C3X/CW110N9K4、4WE10C3X/OFCG24N9K4、4WE10C4X/CG12N9DA、4WE10C4X/CG24N9DA、4WE10C4X/CW110N9DA、4WE10C4X/OFCG12N9DA、4WE10D3X/CG12N9K4、4WE10D3X/CG24N9K4、4WE10D3X/CG24N9K4、4WE10D3X/CW110N9K4、4WE10D3X/CW110N9K4、4WE10D3X/OFCG12N9K4、4WE10D3X/OFCG24N9K4、4WE10D3X/OFCW110N9K4、4WE10D3XCG24N9K72LAN、4WE10D3XOFCG24N9K72LAN、4WE10D4X/CG24N9DA、4WE10D4X/CG24N9DAL、4WE10D4X/CW110N9DA、4WE10D4X/CW110N9DAL、4WE10D4X/CW110N9DAL=CSA、4WE10D4X/OFCW110N9DA、4WE10D4X/OFCW110N9DAL、4WE10D4X/OFCW110N9DK25L、4WE10D5X/EG24N9K4/M、4WE10D5X/EG24N9K4/V、4WE10D5X/OFEG24N9K4/M、4WE10E3X/CG12N9K4

REXROTH proportional servo valve 4WRZ

REXROTH proportional servo valve 4WRZE

REXROTH proportional servo valve 4WRZ... XE

REXROTH proportional servo valve 4WRZM

REXROTH proportional servo valve 4WRZEM

REXROTH proportional servo valve 4WRKE

REXROTH proportional servo valve 4WRA

REXROTH proportional servo valve 4WRAE

REXROTH proportional servo valve 4WRA... XE

REXROTH proportional servo valve 4WRE

REXROTH proportional servo valve 4WREE6

REXROTH proportional servo valve 4WREEM

REXROTH proportional servo valve 4WREF