Original Italian Atos ATOS solenoid valve

Original Italian Atos ATOS solenoid valve

ATOS, an Italian manufacturer of electro-hydraulic components, is a world leader with advanced technology that can improve the performance of modern machines through integrated hydraulic components with electronic components.

Having the worldThe modern equipment factory and sophisticated processing methods, as well as technical support, make Atos an expert in electro-hydraulic technology. The new product design and constantly updated design make Atos one of the world's leading companies in the same industry.

Original Italian Atos ATOS solenoid valve

ATOS solenoid valve action express, with small power and lightweight appearance. The response time of solenoid valves can be as short as a few milliseconds, and even pilot operated solenoid valves can be controlled within tens of milliseconds. Due to its self-contained circuit, it responds more sensitively than other self-control valves. A well-designed solenoid valve coil has low power consumption and is considered an energy-saving product; It can also automatically maintain the valve position by triggering the action, without consuming any electricity during normal operation. The electromagnetic valve has a small external size, which saves space and is lightweight and beautiful. The adjustment accuracy of the solenoid valve is limited, and the applicable medium is restricted. Electromagnetic valves usually have only two states: on/off, and the valve core can only be in two extreme positions, which cannot be continuously adjusted. (There are many new ideas trying to break through, but they are still in the experimental stage) Therefore, the adjustment accuracy is still limited to a certain extent.

Features:

1. New casting process for shell, mass production on assembly line, and deburring by hot burning method

2. Valve core safety interchangeability

3. Wet electromagnet, fully enclosed coil, sturdy overall, suitable for outdoor work

Original Italian Atos ATOS solenoid valve

Working principle: The solenoid valve has a sealed chamber with through holes at different positions, each hole leading to a different oil pipe. The middle of the chamber is the valve, and there are two electromagnets on both sides. The magnetic coil on which side is energized will attract the valve body to which side. By controlling the movement of the valve body, different oil discharge holes will be blocked or leaked out. The oil inlet hole is normally open, and hydraulic oil will enter different oil discharge pipes. Then, the oil pressure will push the piston of the cylinder, which in turn drives the piston rod, which drives the mechanical device to move. In this way, the mechanical motion is controlled by controlling the current of the electromagnet.