Organizational crusher

Organizational crusherThe shell is made of aluminum alloy casting, and the crushing cup and blade are stamped with stainless steel plate, with adjustable speed and a timing device.

Technical parameters:

Power supply voltage: 220V 50HZ

Adjustable speed range: 12000 revolutions per minute

Motor power: 120W

Capacity: 1000ml, converted to 100g solid and 800ml liquid

Notes:

Organizational crusherUsing a three eye safety socket, it is necessary to connect the ground wire before use. When working, the machine should be placed on a flat and solid table to prevent vibration. When crushing at high speed, the cup cover should be held down by hand. When it is difficult to slide the shaft joint up and down, one to two drops of engine oil should be injected to lubricate it and prevent crushing hard materials such as bones and mineral sand. The machine uses a series motor, and its carbon brush is generally used for about 500 hours. It should be replaced in a timely manner to avoid the phenomenon of the commutator being worn out due to the polishing of the carbon brush. After the machine is completed, the crushing cup should be cleaned and inverted before installation, and placed in a dry and ventilated place.