Online water oil sensor (UV fluorescence)

Application areas:
Industrial circulating water, wastewater treatment, surface water stations and other water quality monitoring.
Instrument features:

Immersion probe design

● High sensitivity

● Wide operating range

Electronic daylight compensation

● Use SC1000 controller with connection box for operation

Measurement principle:
The KM water oil sensor uses ultraviolet fluorescence analysis, which is a very sensitive method that can determine the concentration of polycyclic aromatic hydrocarbons in water and has a strong correlation with the oil content in water. The measured radiation intensity comes from the water sample, which can absorb light at shorter wavelengths and emit light (fluorescence) at longer wavelengths. Different types of oil have different radiation characteristics. Immersion UV fluorescence spectrophotometer with KM water oil sensor. Micro design and long-term stability make it highly suitable for hydrocarbon monitoring in industrial fields, as well as all water quality and wastewater monitoring areas.

Technical parameters of KM water oil sensor:
Measurement range: 0-50 μ g/L, 0-500 μ g/L or 0-500 μ g/L, 0-5000 μ g/L or pre-set range. Resolution: * High resolution of 0.1 μ g/L (for * low range) Light source: Miniature xenon flash lamp with interference filter (peak wavelength of 254nm, 25nm FWHM). The output energy is controlled by an internal reference ultraviolet diode. Detector: UV photodiode with interference filter (peak wavelength of 254nm, 25nm FWHM). Power supply: The 100-240VAC sensor power supply is provided by the SC1000 junction box. KM water oil analyzer output signal: with 4 × 0/4-20mA analog output chassis material: plastic and stainless steel resistant to seawater corrosion