Online microwave moisture analyzer, coal ore online moisture measurement and control device

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Steel industry: sintering mixtures, slag, coke, coal, ball ore $r $n Coal industry: coal blocks, peat, coal powder, clean coal $r $n Tobacco industry: cigarette packs, tobacco leaves, cut tobacco, tobacco stems, etc. $r $n Paper industry: whole vehicle waste paper, whole vehicle wood/bamboo chips, microwave moisture measurement of whole package waste paper, pulp board $r $n Fiber industry: density board wood chips, wood chips $r $n Online microwave moisture analyzer Coal mining biomass power generation industry: whole vehicle wood chips, bark moisture, coal moisture detection on conveyor belts $r $n Food industry: flour, grain, distiller's grains, food processing $r $n Sand and gravel, zinc ore, copper ore, nickel ore, bauxite, diatomaceous earth, bentonite, fertilizer, ceramic powder, etc

Product Details

TXM-WBOnline microwave moisture analyzer

Online microwave moisture analyzer, coal ore online moisture measurement and control device

principle：

Microwave moisture analyzer uses microwave penetration method to achieve moisture monitoring. When microwaves pass through wet and dry materials, the propagation speed and intensity of microwaves in the propagation direction will change differently. Wet materials will slow down the propagation speed and weaken the intensity of microwaves. The measurement principle of microwave moisture meter is to calculate the moisture content in the material by detecting the changes in these two physical properties of the microwave after passing through the material. The microwave signal is emitted by the antenna below the conveyor belt, and after passing through the material, it is transmitted byThe corresponding antenna above the C-frame receives. By accurately analyzing the microwave signal passing through the material, the mass fraction of water in the material is derived, and the results are output in real-time and displayed on the LCD screen interface.

Advantage:

1. Not sensitive to the pH value and conductivity of the tested material.

2. Strong penetration ability (can calculate the sum of surface and internal moisture of the tested material), making the test results more representative.

3. Non contact measurement: Will not wear out the probe, will not adhere to materials, and will not affect the production process.

4. Provide instantaneous measurement values (with adjustable average time) for process control.

5. High measurement accuracy, up to ± 1% in the case of uniform materials.

6. Maintenance free and low operating costs.

7. Not affected by environmental dust and water vapor, with strong anti-interference ability.

8. Not affected by material color changes and sunlight exposure.

9. It can transmit 4-20mA and RS485 (Modbus RTU) signals in real-time, connect to central control systems such as PLC and DCS, and better grasp test data in real-time.

model	TXM-WB
test scope	0-80% (depending on the application)
resolution	0.01%
measurement accuracy	0.1% -0.3% (typical application)
measurement method	Non contact microwave penetration measurement
Microcomputer processor	8 inches
AC power	Rated voltage: single-phase100～220V
AC power	Allowable deviation:-20%～+20%
power consumption	25-30W
Protection level	IP67
material	aluminum alloy
environment	-20℃～+85℃
Probe material	Cast aluminum casing
Probe DC power supply	DC voltage:24V
Probe power consumption	Single probe power consumption:≤35VA。
Probe environment	-40℃～+85℃
Probe storage temperature	-60℃～+160℃
Probe microwave antenna	Frequency band:2.4GHz
Probe signal cable	High frequency transmission line
output	RS485 and 4-20mA

Online microwave moisture analyzer, coal ore online moisture measurement and control device

Application industry:

Steel industry: sintering mixtures, slag, coke, coal, pellet ore
Coal industry: coal chunks, peat, coal powder, clean coal
Tobacco industry: cigarette packs, tobacco leaves, cut tobacco, tobacco stems, etc.
paperIndustry: Whole vehicle waste paper, whole vehicle wood chips/Bamboo slices, microwave moisture measurement of whole waste paper, pulp board
Fiber industry: MDF sawdust, wood chips
Biomass power generation industry: vehicle sawdust, bark moisture, coal moisture detection on conveyor belts
Food industry: flour, grains, distillers' grains, food processing
Sandstone, zinc ore, copper ore, nickel ore, bauxite, diatomaceous earth, bentonite, fertilizer, ceramic powder, etc