OT8-UFX series open fixed table deep throat punch press

NegotiableUpdate on 07/22

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Performance and features: Increasing the throat depth is four times that of a typical punch press, which can meet the stamping processing needs of wide and large-sized parts

Product Details

Performance and features:

Increasing the throat depth is four times that of a typical punch press, which can meet the stamping processing needs of wide and large-sized parts.
Adopting the traditional classic crankshaft horizontal arrangement and a rigid key clutch structure, the operation, adjustment, and maintenance are simple and convenient, the action is sensitive, and the performance is reliable.
The collapse type safety device prevents damage to the punch press and mold caused by overload use.
A T-shaped groove on the bottom surface of the slide block of a punch press weighing over 80 tons.
Punch press sliders weighing 100 tons or more are guided by six sided rectangular guide rails, which have higher guiding accuracy and stronger load-bearing capacity.
Punching machines weighing 20 tons or more can be equipped with emergency braking devices. The emergency braking device can make the slider stop abruptly within the range of 0-135 °.
Punching machines weighing 16 tons or more can be equipped with a combination pneumatic friction clutch brake, which has a compact structure, smooth transmission, sensitive action, easy operation, and low noise. Through electrical and pneumatic control, the slider can be abruptly stopped at any position, achieving inch movement, single punch, continuous punch, and emergency stop actions.
Punching machines weighing 80 tons or more can be equipped with pneumatic dual balance cylinders to balance the weight of the slider and upper mold, reduce reverse impact and noise, eliminate the gap between the connecting rod and slider, and reduce the impact and wear of the punch press's stressed parts.
Punching machines weighing 80 tons or more can be equipped with electrically adjustable mold height and digital display for easy adjustment.
Optional photoelectric protection device can be installed to prevent work-related accidents in punching machines.
Optional transmission output shaft, automatic feeding, air cushion and other devices.

model			OT8-UFX6.3	OT8-UFX10	OT8-UFX16	OT8-UFX20	OT8-UFX25				OT8-UFX40				OT8-UFX63		OT8-UFX80	OT8-UFX100	OT8-UFX125	OT8-UFX165	OT8-UFX200	OT8-UFX250
model			OT8-UFX6.3	OT8-UFX10	OT8-UFX16	OT8-UFX20	A	B	C	D	A	B	C	D	A	B	OT8-UFX80	OT8-UFX100	OT8-UFX125	OT8-UFX165	OT8-UFX200	OT8-UFX250
Nominal force		KN	63	100	160	200	250				400				630		800	1000	1250	1650	2000	2500
Nominal force travel		mm	2	2	3	3	3				4				4		7	7	5	6	6	6
Slide stroke		mm	35	60	70	90	80				100				120		120	140	150	160	180	190
Stamping frequency per minute		Times/minute	170	145	125	90	100				55				50		45	38	40	40	40	40
Maximum mold height		mm	110	130	180	180	180				220				270		440	480	340	350	360	370
Adjustment of mold height		mm	30	35	60	70	70				80				90		90	100	100	100	100	100
throat depth		mm	700	700	700	700	710	850	1000	1250	710	850	1000	1250	800	1000	800	900	850	850	850	850
Distance between columns		mm	162	182	280	240	290				390				450		600	720	650	620	640	710
Bottom size of slider	before and after	mm	120	150	180	200	200				270				280		360	480	480	450	500	540
Bottom size of slider	about	mm	140	170	200	220	220				320				320		430	540	540	650	700	740
Mold handle hole size	diameter	mm	Ø30	Ø30	Ø40	Ø40	Ø40				Ø50				Ø50		Ø60	Ø60	Ø60	Ø70	Ø70	Ø70
Mold handle hole size	depth	mm	55	55	60	60	60				70				80		80	80	80	80	80	80
Workbench size	before and after	mm	200	240	400	360	360				460				480		650	710	710	750	780	800
	about	mm	310	360	550	560	560				700				710		950	1100	1100	1150	1200	1280
	thickness	mm	40	50	60	70	70				80				90		100	120	120	140	140	140
	Material drop hole	mm	Ø60	Ø100	Ø110	Ø120	Ø120				Ø150				Ø180		Ø200	Ø220	Ø220	Ø250	Ø300	Ø300
Electric motor power		KW	0.75	1.1	1.5	2.2	2.2				4				5.5		7.5	11	11	15	22	22
External dimensions	before and after	mm	1540	1620	1760	1780	1820	2250	2600	3150	2010	2440	2790	3340	2230	2840	2410	2920	3020	3270	3300	3420
	about	mm	700	730	900	920	1100				1220				1335		1500	1780	1710	1780	1980	1970
	tall	mm	1525	1800	1880	2230	2000				2300				2620		2950	3310	3060	3310	3650	3810