OEMER Three phase Synchronous Motor MTES 132SB/2 Parameters and Applications

I. Overview

OEMER's MTES 132SB/2 is a high-performance three-phase synchronous motor with features such as compact design, high efficiency, high precision, and low noise. This motor adopts excellent permanent magnet synchronous technology and is suitable for various occasions that require precise motion control.

2、 Parameter characteristics

1. Size and weight: The MTES 132SB/2 motor is compact in size, lightweight in structure, and lightweight, making it easy to integrate into various mechanical equipment. Its compact size and lightweight design give it significant advantages in applications where space is limited and lightweight is required. The length, width, and height of the motor are XXXmm, XXXmm, and XXXmm, respectively, and the weight is only XXXkg. This compact design enables the motor to adapt to various narrow space application requirements.

2. Torque and speed: The rated torque of the motor is XXX Nm, and the maximum continuous torque is XXX Nm. At rated speed, the motor can provide stable output torque to meet various high load and high dynamic performance requirements. The rated speed range of the motor is 0-3000rpm, with a wide speed regulation range that can be accurately adjusted according to different needs. In addition, the motor also has a high overload capacity, which can withstand higher load torque in a short period of time and adapt to short-term high-intensity work requirements.

3. High efficiency: The MTES 132SB/2 motor adopts excellent permanent magnet synchronous technology and has the characteristic of high efficiency. This helps to reduce energy consumption and operating costs, while also lowering environmental load. The efficiency level of the motor can reach IE4 or higher, which can significantly reduce energy consumption and operating costs during long-term operation.

4. Dynamic response: The motor has fast dynamic response performance and can achieve the required speed and torque in a short period of time. This makes it perform well in situations that require fast positioning and high-speed movement. The dynamic response time of the motor is usually in the millisecond range, which can quickly follow the changes in the control signal and achieve fast positioning and motion control.

5. Control accuracy: The MTES 132SB/2 motor is equipped with a high-precision encoder, which can achieve precise speed and position control. The resolution of the encoder can reach XXX pulses per revolution, providing accurate angular displacement measurement and motion synchronization function. In addition, the motor also supports multiple control modes, such as position control, speed control, and torque control, to meet different application requirements. By working in conjunction with the control system, high-precision motion trajectory control and positioning can be achieved.

6. Protection level: The motor has a certain level of protection and can adapt to different environmental and climatic conditions. The protection level of the motor may vary depending on the specific model and specifications, and users can choose the appropriate protection level according to their actual needs. The motor can withstand the influence of environmental factors such as water droplets and dust, and can resist external erosion to a certain extent. This enables the motor to maintain stable performance even under harsh environmental conditions.

7. Cooling method: The motor adopts natural cooling or forced cooling to ensure stable temperature under continuous high load working conditions, avoiding performance degradation or damage caused by overheating. Through reasonable heat dissipation design, the motor can maintain good heat dissipation effect during long-term operation, ensuring stable performance.

8. Installation method: MTES 132SB/2 motor supports multiple installation methods, such as flange installation, foot installation, etc., making it convenient for users to choose and install according to different mechanical transmission needs. The installation methods of motors are flexible and diverse, and suitable installation methods can be selected according to actual application scenarios.

9. Compatible with multiple drives: The motor is compatible with multiple drives, such as servo drives, frequency converters, etc., making it convenient for users to achieve precise speed and position control. Users can choose suitable drivers and controllers according to their actual needs. By using different drivers in combination, diverse motion control requirements can be achieved.

10. Customized services: OEMER provides customized services, which can customize the design and production of motors according to the specific needs of customers. For example, changing the size, performance parameters, appearance design, etc. of the motor to meet the special requirements of customers. Through customized services, customers can obtain motor products that better meet their specific needs.

11. Reliability: The motor adopts high-quality materials and excellent manufacturing processes, and undergoes strict quality control and durability testing to ensure stable and reliable performance during long-term use. Reduced maintenance costs and downtime for frequent motor replacement. The reliability of the motor has been fully guaranteed and can be widely applied in various critical situations and high demand fields.

12. Environmental adaptability: The motor can work in different environments such as temperature, humidity, and altitude, and has good environmental adaptability. The working temperature range is generally between - XXX ℃ and+XXX ℃. In addition, the motor also has good anti vibration performance and can adapt to different vibration environments. The environmental adaptability of motors enables them to operate stably in various complex environments, meeting the needs of various industrial applications.

13. Low noise: The motor has low operating noise and is suitable for situations that require silent operation, improving the comfort and efficiency of equipment use. The low-noise design of the motor ensures that the noise generated during operation is within an acceptable range and will not interfere with the working environment or affect the user experience.

OEMER motor model:

MTS 112M/2-4

MTS3 80B/4

MTS3 132MA/4

VFS 60 A - 1024

HQL 80 S，

HQL 100-P

HQL 132 M

HQL 160 M

HQLa 160 L

HQL 225 P，

QL 100 P

QL 100 M

QL 100 X

QL 100 L

OEMER Three phase Synchronous Motor MTES 132SB/2 Parameters and Applications