Nylon water absorption and moisture absorption treatment box

NegotiableUpdate on 02/11

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The nylon product humidification and toughening treatment box is an environmentally friendly, energy-saving, and efficient equipment widely used in different types of nylon component products such as automotive parts, power tool casings, nylon connectors, nylon zip ties, nylon retainers, etc. $r $n Nylon is a material that is easily hygroscopic. Nylon that is fully hygroscopic has a toughness that is about 8 times higher than dry nylon. Nylon can also increase its toughness by 1.5 to 2 times in normal air environments. However, in natural environments, the moisture absorption time is longer. From the perspective of nylon molecular structure, nylon molecules are water absorbing molecules. Once saturated with water, they can enhance the toughness of the material, PA6 PA66 PA6

Product Details

Nylon water absorption and moisture absorption treatment boxAfter processing is completed

1. Save labor and operational costs;

2. Product appearance: No white spots, no water stains, no need for manual wiping;

3. Product corner joint: no white spots, no crystals;

4. The product can be used directly without the need for sun drying, air drying, blow drying, or wiping

5. Energy saving and consumption reducing technology: Adopting a temperature and humidity balance control method, the intelligent temperature and humidity control system continuously regulates the output, combined with independent PID automatic adjustment, thereby reducing actual energy consumption and saving more than 40% energy compared to conventional methods.

Device Model		EZH1200L	EZH 2100L	EZH4000L	EZH6000L	EZH8000L
insideministryVolume（m3）		1.2m3	2 .1m3	4 m3	6m3	8m3
performance	temperature range	room temperature+10℃～+100℃
	humidity range	60～98%RH
	temperature fluctuation	±0.5℃
	temperature deviation	±2.0℃
	Humidity deviation	±3.0%RH（＞75%RH）
	heating rate	Heating up: 2-3/min
	Common conditions	70℃ 99%RH； 85℃ 85%RH
inner dimensions	W	1000	1050	1500	1500	2000
	D	750	1200	1500	2000	2000
	H	1600	1600	1800	2000	2000
external dimensions	Based on design
returnable container	You can layout according to the size of your company's turnover box; Purchase turnover boxes on your own.
delivery time	Confirmation shall prevail; In stock7-15 days; 30 days without inventory.

4Product Structure:

Preface	project	inside Rong
A	Equipment Composition	The equipment is designed towholeType structure,Mainly controlled by the control system/Composed of insulation box, heating system, humidification system, water replenishment system, air circulation system, protection system, etc
B	insulated box	The external structure of the entire chassis is treated with cold-rolled steel plate spray coatingScratch resistant and aesthetically pleasing Insulation layer:Thickness not less than100mm high density (42kg/m)³）Polyurethane foam; Inner wall:1.0mmSUS304 stainless steelBoard production; All seams on the inner wall of the box are welded with argon arc.
B	Load bearing floor	landPlate load-bearing capacity: greater than500kg/m ² uniform load
D	gate	boxadoptsingleopenOr double openGate, designed with four sided door frames； double-layerHigh and low temperature resistant soft silicone rubber sealing stripseal up. The gate adopts a rotating hingeSpecial door handle lock.
E	observation window	Observation window specifications:400W×500H mm ， located inOn the door of the box; Multi layer hollow electric glass observation window for clear observationinside the box.
F	caster	equipFour or more swivel casters with fixed brakes

Preface	project	inside Rong
A、	air circulation	Principle:Adopting forced air circulation through the rear air duct, with double-layer louvers on the top for side air supply, to meet the requirements for wind speed and temperature uniformity. The air in the studio is sucked in from below the air conditioning box, and the heated air is sucked in by the centrifugal fan. After being guided by the guide blades at the outlet of the fan volute, it is sent into the studio from the top of the box to achieve heating or cooling of the studio.
A、	circulating fan	circulating airadopttogether2setOr multiple sets of high-temperature resistant long shaft motors. Adopting stainless steel centrifugal impeller，Cooperate with the stainless steel snail shell specially designed for circulating air to make the temperature and humidity inside the box more uniform.
B、	Wenwetdegree measurement	adoptPt100 temperature sensor for temperature measurement. Air temperature monitoring: a rod-shaped dual corePt100 temperature sensor, one for air temperature control and independent over temperature protection, and the other for over temperature protection and backup.
C、	heater	1Adopting a bare armor heater, it has the characteristics of low surface load, sensitive temperature control, and small temperature hysteresis. Using solid-state relays for contactless zero crossing triggering to drive the heater, with no contact sparks or noise, and a long service life. After being powered on, the surface temperature of the armored heater will increase. 2After passing through the heating wire, the temperature of the convective air increases, spreading the heat to the air inside the box and the specimen, playing a role in heating and increasing the temperature. 3Heating power is provided byPID algorithm for precise control, regulating output power through solid-state relays. 4. The temperature protection switch of the heating tube has an alarm temperature set at+150 ℃
D、	Wenwetdegree control	The controller collects temperature datawetCompare the sensor signal with the set value, and usePID output automatic adjustment heatinghumidifyPower to maintain the temperature of the air inside the equipment boxwetThe degree reaches dynamic equilibrium.
Preface	project	content
A	control system	adoptTemperature and humidity control adoptsIndependently developed specialized equipment for nylon humidification and toughening treatmentControl system, which controls usingPLCAs the control host,Having manyRoad numbersI/O modules and multi-channel analog I/O modules have high-precision PID partition operation function, flexible communication and recording storage function.