Non contact ultrasonic crusher

KS-2500FTNon contact ultrasonic crusher

The pictures are for reference only. Please refer to the actual product

1、 Principle: Traditional probe ultrasonic disruptors have direct contact between the probe and the sample, and can only process one sample at a time, resulting in a long experimental cycle; For multiple samples, it is necessary to reuse the same probe, which can easily cause cross contamination of the samples. Due to the different depths at which the probe is inserted into the sample, the energy distribution of each ultrasound is also different, which affects the repeatability and accuracy of the experimental results. In addition, since the closed system cannot be used, the aerosol or foam generated in the ultrasonic process will diffuse to the environment, causing potential biological hazards.

Non contact ultrasonic crusherAt the same time, it can process 6-32 samples with high experimental efficiency; No need to frequently operate the probe, all samples are in separate fully enclosed test tubes to avoid cross contamination; Adopting high-temperature resistant -5~100 ℃ water bath ultrasonic, with uniform energy distribution and ultrasonic effect *; The ultrasound parameter settings are flexible, the experimental steps are standardized, the experimental reproducibility is good, and the results are highly reliable.

2、 Main applications:

1. Drug extraction, cell, bacterial, and viral tissue fragmentation. Extraction of intracellular contents.

2. The dispersion, homogenization, and emulsification of material particles. Such as the dispersion of nanomaterials.

3. Accelerate dissolution and chemical reactions. If used for chemical synthesis,

4. This ultrasound device is equipped with a soundproof speaker bracket, a dedicated soundproof speaker, and a low-temperature system.

5. Ultrasonic treatment of samples is an application of sonochemical equipment, which can be used for plant extraction, water treatment, solid-liquid dispersion, particle disintegration in liquids, promoting solid-liquid reactions, and other effects, dispersing larger particle aggregates into smaller particles. Stabilization refers to ensuring the long-term uniform dispersion of powder particles in liquid, etc

3、 Technical features:

1. The latest ultrasound digital circuit can provide continuous and uninterrupted ultrasound, automatically track frequency and resonance point, and control power without the need for frequent manual energy adjustment Not occupying laboratory space

*2. Working mode: 7-inch touch screen touch operation, simple and convenient operation; Real time display of working parameters on the screen and cumulative display of operating status; 99 hour process control timer control total time: 1 second to 99 hours, 59 minutes, 60 seconds

3. The ultrasonic frequency converter adopts lead zirconate titanate crystal piezoelectric frequency converter, which is sealed to isolate water vapor and corrosive gases

4. The on/off pulse timer can be set from 1 second to 99 hours for both closed and open cycles, ensuring high-intensity processing of samples

5. Automatic amplitude and pulse compensation function ensures that the probe amplitude does not change due to changes in load during the ultrasound process

6. The ultrasonic chip adopts imported CV33 and PZT piezoelectric ceramic chips, with high ultrasonic efficiency and low heat generation after long-term operation

7. The transducer is made of American standard TC4 high-purity titanium alloy material, which has strong fastness and is not easy to wear out. It can be continuously ultrasonicated and unloaded

3、 Basic Parameters

1. Control method Touch screen: 7-inch high-definition color touch screen control

2. Operating frequency (KHz) Frep.: 20-25 automatic frequency search

3. Ultrasonic power (W) Uirasonic Power: 2500w ± 30%

4. Adjustable power (%) Power Range: 1-100 infinitely adjustable

5. Effective size of inner groove (mm) size: 3000mm

6. Set temperature range (℃) Temp. Range: -5-100

7. Time Control (S) Time: 0-99H59M59S

8. Probe diameter (mm): 60mm

9. Protection functions: over temperature, over power, over time, overload protection

10. Soundproof box: standard configuration

11. Low temperature device: standard configuration

4、 Standard configuration of the whole machine

1. Control one host

2. One chiller

2. One working chassis

3. One power cord

4. One connecting wire

5. One copy of the operation manual

5、 Whole machine after-sales service

1. The whole machine comes with a one-year warranty, and any problems that occur within one year will be repaired free of charge

2. Lifetime maintenance and appropriate charging of repair fees

3. It is possible to extend the warranty, please contact the manufacturer for the extension fee