Non contact phase sequence table PD3129-32

NegotiableUpdate on 03/24

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Non contact type! Perform phase detection above the measured voltage

Product Details

Non contact phase sequence table

Non contact type! Perform phase detection above the measured voltage

Equipped with magnetism that can be fixed on the distribution panel
● catiii 1000V / cativ 600V
Clamp a 500mm2 equivalent wire under test
The rotating display of LED makes the phase sequence of three-phase power supply clear at a glance
When in the positive phase, emit a short beep sound; When reversing, emit a long beep to distinguish
● Power on inspection of wires&simple electrical inspection
After stopping use for 15 minutes, the power will be automatically cut off.

Instructions for using the non-contact phase sequence table PD3129-31/32

The illuminated arrow makes it easier to determine the positive sequence of the phase sequence table

If the sequence is correct, the arrow in the middle of the body will light up green.
The correct sequence is clear at a glance.
Moreover, because it can be clearly photographed, it is very suitable as a proof photo for engineering graduation reports, etc.

Metal non-contact phase sequence table for safe measurement

Metal non-contact clamps can be used to directly clamp on insulated wires for measurement.
Implement secure phase sequence detection work.
(Image is PD3129-32)

A phase sequence table with magnets that can make work smoother

There are 4 magnets on the back that can be fixed to the electrical box.
It can free up both hands to measure and immediately improve work efficiency.
(Image is PD3129-32)