Needle tube sealing adhesive curing automated tunnel furnace

Needle tube sealing adhesive curing automated tunnel furnace

Fully automatic tempering furnace, hydrogen removal production line, ovenUsing programmable logic controller (PLC) and software to change the control process, automation control technology is adopted, making control convenient, simple, and flexible. High precision, intelligent, and user-friendly construction, easy to operate, greatly improving productivity!

1Features of the equipment

◆ The action process is completed by PLC and can be set according to the process flow；

◆ The equipment is divided into three temperature rangesThe first temperature zone is the preheating zone, and the second and third temperature zones are the constant temperature zones;

◆ The inner liner is made of stainless steel，The surface spraying treatment ensures the corrosion resistance of the equipment;

◆ Dual cylinder control for opening and closing doors, each door has a signal switch for opening the door in place and a signal switch for closing the door，safe and reliable

◆ Install door limit guide rails on both sides of the door, ensuring smooth movement of the door during opening and closingThere will be no lagging phenomenon;

◆ Steel solid roller, single bearing capacity>2.5T; long-lasting without deformation;

◆ 750W deceleration motor, independently controlled in 5 zones (feeding, 3 temperature zones, discharging);

◆ Corrective mechanical devices are installed on both sides of the loading area to ensure that materials enter the work area normally;

◆ Five areas are equipped with independent position sensing switches to ensure that materials are always in their optimal position during equipment operation;

◆ The material tray adopts a hollow design, which is lightweight and has good ventilation effect. The four corners are equipped with mechanical limits, which can be stacked layer by layer for stability and reliability;

◆ The base adopts hollow and reinforced design, which is lightweight and has good ventilation effect.

IIMain technical parameters

1.Device dimensions：Working size: W1400 × H950×D11400 mm

External dimensions: W2358×H3260×D11400mm

2.Temperature range: room temperature+40℃～350℃

3.Temperature uniformity (full load, nine point temperature detection):<±10°C

4.Power supply: 3 µ 380V 50HZ, total power: 175KW

5.Thermal insulation performance: High grade aluminum silicate cotton with a thickness of 100mm, good thermal insulation performance

6.PLCControl system.

Company Name: Shanghai Danshun Industrial Co., Ltd

Needle tube sealing adhesive curing automated tunnel furnace