NIDEC servo motor 055UDC300BACRA063110

NIDEC servo motor 055UDC300BACRA063110

Control TECHrIQUES is a professional manufacturer of servo motors and servo drives. Originally an independent brand, it was later acquired by Emerson Group and became a sub brand of Emerson. In 2017, Emerson Group sold the Control TECHNIQUES brand to NIDEC Nidec Group, and now Control TECHNIQUES belongs to HIDEC Nidec
The sub brand of the group. .
Shenzhen Kapert Electromechanical Equipment Co., Ltd. has been operating COHTROL TECH VEs brand servo motors for many years, with fast delivery times. Welcome new and old customers to inquire.

NIDEC servo motor 055UDC300BACRA063110

055UDC300BACRA063110:

Unimotor FM series servo motor, voltage: 460VAC, 55mm base size, 18.7 lb in Cont. No load speed and static torque, 3000RPM high speed, Connected, encoder configuration: incremental encoder
055UDC300BACRA063140
055UDC300BAEMA063110:

Unimotor HD series servo motor, voltage: 460VAC, 55mm base specification, 13.1lb in (1.48Nm), 1.0A, 3krpm, Inductive EnDat SinCos multi turn, with or without brake: No, size 1.0 power, 90 ° rot. conns, Key installed, std inertia, 63mm BCD, 11mm shaft dia
055UDC305BACRA063110:

Unimotor HD series servo motor, voltage: 460VAC, 55mm base specification, 13.1lb in (1.48Nm), 1.0A, 3krpm, Inc. Enc. 4096ppr, with or without brake: Yes, with safety brake, size 1.0 power, 90 ° rot. conns, Key installed, std inertia, 63mm BCD, 11mm shaft dia
055UDC305BAEMA063110:

Unimotor HD series servo motor, voltage: 460VAC, 55mm base specification, 13.1lb in (1.48Nm), 1.0A, 3krpm, Inductive EnDat SinCos multi turn, with or without brake: Yes, with safety brake, size 1.0 power, 90 ° rotor. conns, Key installed, std inertia, 63mm BCD, 11mm shaft dia
The speed and torque control of servo motors are both controlled by analog signals, while position control is controlled by sending pulses. If there are no requirements for the speed and position of the motor, constant torque mode can be used. The set torque can be changed by changing the analog signal settings in a timely manner, or by changing the corresponding address values through communication. If there are certain progress requirements for position and speed, speed or position mode can be used. Position control mode is generally determined by the external input pulse frequency to determine the size of the rotation speed, and the rotation angle is confirmed by the number of pulses. As position mode can have strict control over both speed and position, it is widely used in the industry.