NF-HSA4101 High Voltage Power Amplifier

NegotiableUpdate on 05/19

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Bandwidth: (-3dB) DC~3MHz $r $n Voltage: 150Vp-p ( 75Vp) $r $n Current: 1.41Ap $r $n Power: 105Wp $r $n Pendulum rate: ≥ 1000V/μ s $r $n Applications: Ultrasonic motor drive, soft magnetic testing, non-destructive testing, magnetic core loss testing, driving piezoelectric ceramics

Product Details

Introduction to ATA-4315 High Voltage Power Amplifier

ATA-4315 is an ideal single channel high-voltage power amplifier that can amplify both AC and DC signals. The maximum output voltage is 150Vp-p (± 75Vp) and the power is 105Wp, which can drive high-voltage power type loads. The voltage gain can be adjusted by numerical control, and commonly used settings can be saved with one click, providing you with convenient and concise operation options. It can be used in conjunction with mainstream signal generators to achieve signal amplification.

Input

The input is BNC interface, with two options of input resistance of 50 Ω and 1k Ω, matched with high and low internal resistance signal sources.

Output Output

The output is a banana socket, with a maximum output voltage of 150Vp-p (± 75Vp) and a maximum output current of 1.41Ap.

LCD panel display

ATA-4315 high-voltage power amplifier operation panel LCD display, dynamic display of equipment status and parameters, clear and easy to understand interactive interface.

voltage gain

The voltage gain of ATA-4315 high-voltage power amplifier can be adjusted from 0 to 50 times, and is divided into two types: coarse adjustment (1step) and fine adjustment (0.1step). Combined with the display of LCD panel gain, it can quickly adjust to the required voltage value.

Monitoring port Monitor

1/100 Monitor: The voltage of this port is 1/100 of the output port, and the monitoring port is a BNC connector that can be directly connected to an oscilloscope for real-time monitoring of the output voltage.