N95 ultrasonic edge banding machine

Ultrasonic welding (ultrasonic edge banding machine) converts 50/60Hz electrical energy into 15, 20, and 30 electrical energy through an ultrasonic generator. The converted high-frequency electrical energy is converted back into mechanical motion of the same frequency through a transducer, and then the mechanical motion is transmitted to the welding head through a set of amplitude changing rod devices. The welding head transfers the received vibration energy to the joint of the workpiece to be welded, where the vibration energy is converted into thermal energy through friction, melting the material. Ultrasonic waves can not only be used for welding hard thermoplastic plastics, but also for processing fabrics and films.

Main technical parameters:

Input power supply: AC220V ± 10%

Transducer: 20K 2600W

Output power: Z large 2600W

Frequency modulation control: Simulate resonant frequency modulation circuit.

Frequency range: 18.5-21KHz

Output high voltage: 600-800V

Dimensions: 189mm (width) x 368mm (height) x 498mm (length)

Working environment: -10 ℃ to 60 ℃

Host weight: 10kg

Protection level: IP64, preventing dust from entering

Installation connector: 3-core, 5-core

Installation location: away from heat sources and in a place with good air convection.

Transducer: Risheng chip

Welding head: forged steel mold

Upper mold: P20 mold steel

N95 mask edge sealing angle: 135-137-140-141-145 (customized according to sample)