Multi head constant temperature and speed magnetic heating stirrer with temperature control, speed measurement, and timing integrated

Multi head constant temperature and speed magnetic heating stirrer with temperature control, speed measurement, and timing integrated

1、 Product Introduction:
The multi head constant temperature and speed magnetic heating stirrer has the function of heating and stirring multiple sets of test bottles simultaneously, and can be controlled separately. It is easy to operate and has stepless speed regulation, suitable for stirring and heating small volume samples for comparative experiments.

2、 Technical indicators:

3、 Notice before use:

1. Please read this manual carefully before use.
2. The working platform of the machine cannot be excessively smooth (such as tiles, etc.).
3. The electrical rated parameters of the socket provided by the user should not be less than the electrical rated parameters of the machine, and there should be good grounding measures.
4. It is strictly prohibited to dry burn the machine without load to prevent damage to the heating plate.
5. The speed control should start slowly from low speed to high speed.

4、 Instructions for use:

1. Place the test bottle (or other vessel) containing the solution and stirrer on the work panel.
2. Connect the external power supply, turn on the power switch, and the indicator light will turn on.
3. Adjust the speed control knob and slowly accelerate to the desired speed when adjusting the speed.
4. Set constant temperature: Place the probe into the solution and turn on the power switch.

5、 Indicator light information
RUN light: Running indicator light. OUT light: Output indicator light.
ALM light: alarm indicator light. TIMER light: timer indicator light.

6、 Key function
Start button: Start stop switch. If a timer is set, the timer time will be automatically called up when starting.
Settings key: Set temperature, speed, timing, and internal parameters.
Reduce key: Adjust the setting data, long press the working state to perform PID self-tuning.
Add key: Adjust setting data, switch between normal mode and timed mode in working state.