Mold bottom dead center detector (SD-401, 402)

In the process of high-speed automatic stamping, product crushing, abnormal material thickness, overlapping stamping parts, and waste materials in the mold are difficult to visually detect. This detector automatically detects and stops the machine and mold in a timely manner to prevent mold damage and effectively improve product quality and stamping quality.

Please identify the original manufacturer (,HENG DA)

Packaging requirements: Original manufacturer cardboard box packaging. Meets transportation requirements

Delivery time: In stock

Standard accessories: one sensing head, one 3M sensing wire, one set of iron blocks for upper and lower installation, and one ground wire

Scope of warranty: One year warranty, replacement within three months (non human damage)

Product Features:

SD­-401One host, one output device (single point)

SD-402One host with two output devices (dual point)

1Sensor operation design distance: Adjust the upper iron block and sensing head to0.8mmto1.2mmMove the motion sensor iron block again to adjust it80～120The operating distance.

2The precision setting range for the operation of monitoring value setting is ±1um—±u99umThe monitoring value is set according to the accuracy you actually need.

3Abnormal speed and shutdown will be displayedSPWhen the upper and lower iron blocks suddenly fall off during stamping, it will displaySP.

4When the sensing line and sensing head are disconnected or the sensing line is pulled apart, it will displayOP.

5Too high abnormality,HIGHThe light will turn on (when the distance exceeds)1.2MMAbove)

6Too low abnormal,LOWThe light will turn on, (the distance is too low)0.8MMBelow)

7Display when there are abnormalities such as misdelivery inspection, material shortage inspection, extrusion inspection, etcES

8When the power difference value exceeds the set value,ERRORThe abnormal light will turn on.

9The machine has a self detection function.

10The specification setting value for this machine is1umThe unit can be selected according to the precision of the mold and the required machine time.