Military standard rain test laboratory

NegotiableUpdate on 07/30

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Manufacturer: Linpin Instrument Co., Ltd. Equipment model: LRHS-1320-PL Standard configuration: External dimensions: approximately 2500mm × 5100mm × 3563 Studio dimensions: 1600mm × 2500mm × 3300 Special instructions: 1. Product images and parameters may differ slightly from the actual product. 2. Customization instructions: All specifications are customized according to the customer's actual situation, and non-standard customization is supported. 3. Inventory delivery: In stock, nationwide delivery guarantee! 4. Kind reminder: There are many models of this product, and the cases are for reference only. For more models, please contact customer service!

Product Details

Manufacturer: Linpin Instrument Co., Ltd

Equipment model: LRHS-1320-PL

Standard configuration:

Dimensions: Approximately 2500mm × 5100mm × 3563

Studio size: 1600mm × 2500mm × 3300

Special note: 1. The product images and parameters may differ slightly from the actual product. 2. Customization instructions: All specifications are customized according to the customer's actual situation, and non-standard customization is supported. 3. Inventory delivery: In stock, nationwide delivery guarantee! 4. Kind reminder: There are many models of this product, and the cases are for reference only. For more models, please contact customer service!

product details

Performance and configuration of the military standard rain test laboratory

Temperature range: water temperature+10 ℃

Rainfall: 10-15 cm/h

Raindrop diameter: 0.5-4.5mm

Test wind speed: adjustable horizontal wind speed of 10-18m/s

Raindrop angle: Raindrops have a horizontal to 45 ° angle variation and evenly strike one side of the specimen

Enhanced rainfall: When conducting tests on large specimens and rain and rain blowing devices cannot be used, this procedure may be considered

Rainfall: 2800+30L/m2/h Raindrops cannot gather into water flow. The distributor distributes drip holes in a grid pattern with a spacing of 20-25.4mm

Rainfall distance: The height of the droplet should ensure that the final velocity of the droplet is 9m/s

Turntable size/load capacity: diameter: φ 1000mm, load capacity: ≥ 50kg

Speed range: 1~5r/min continuously adjustable

Workpiece size limit: The maximum allowable size for the test piece is 1000mm × 1000mm × 1000mm

Outer box material: high-quality storage board

Inner box material: imported high-grade stainless steel SUS304

Insulation material: rigid polyurethane foam

Dripping rain tray: imported high-grade stainless steel SUS304+aluminum plywood+aluminum profile

Controller: Taiwan's "Weilun" temperature and humidity controller (7.0-inch, high-definition true color "TFT" LCD touch screen display)

Heating system: Nickel chromium wire heater

Temperature sensor: high-precision Pt100 platinum resistance temperature sensor

Wind speed sensor: pressure differential wind speed sensor, 4-20mA output

Power supply voltage: AC380V ± 10% 50Hz

Total power: 24.5kW

Safety protection: Fan, motor, water pump overcurrent and overload protection, limit, undervoltage, short circuit, phase loss, overtemperature, leakage protection

Detailed introduction of the military standard rain test laboratory

The military standard rain test laboratory is used to simulate dynamic operation of military equipment or electronic products in various intensity rain environments. The rain test method and main parameters of military equipment can be achieved in one test chamber, which can carry out rain tests with wind source and drip tests. Determine the ability of the casing seals of military equipment or electronic products to prevent rainwater infiltration under rainy conditions, and evaluate the waterproof performance of the product during or after exposure to rain.

Quotation for military standard rain test laboratory products