Metal material tensile testing machine

Machine model: ZB-810 servo controlMetal material tensile testing machine

One Product Usage

ZB-810 servo controlMetal material tensile testing machineIt is mainly suitable for mechanical property tests such as tensile, compressive, bending, tearing, peeling, shearing, and ring stiffness of various non-metallic and metallic materials. This instrument consists of a measurement system

The components include the drive system, control system, and computer client operating software.

II Performance characteristics:

1. Adopting high-precision force sensors with advantages such as high accuracy and good linearity;

2. The power system adopts servo motor+servo driver+precision ball screw+synchronous belt transmission, which runs smoothly and has low noise;

3. The upper and lower fixtures have good coaxiality and high overall mechanical structural rigidity;

4. Strong data collection and processing capabilities, capable of comparing and analyzing multiple test curves simultaneously;

5. Specialized safety facilities with overload automatic protection shutdown, upper and lower travel limit protection shutdown, and leakage automatic power-off protection;

6. A three loop control system for displacement, velocity, and force, with a synchronous acquisition frequency of over 120Hz, can ensure the authenticity and reliability of data even during the material yielding stage;

7. It can achieve control modes such as fixed speed, positioning displacement, fixed load (with adjustable holding time), fixed load increase rate, fixed stress increase rate, and fixed strain increase rate, as well as multiple control modes to meet different testing requirements;

8. The software interface can switch between Chinese, English, and other minor languages, and the test report can be output in Excel or Word document format.

3、 Applicable standards for manufacturing and testing:

1. Manufactured according to GB/T2611 "General Technical Conditions for Testing Machines" and GB/T 16491 "Electronic Universal Testing Machines" standards;

2. Verify and accept according to GB/T12160 "Provisions for extensometers for uniaxial testing" and GB/T16825 "Inspection of tensile testing machines";

3. Testing standards: Meet the requirements of GB, ASTM, DIN, ISO, JIS, BS and other standards.

4 Main technical parameters:

1. Sensor range: 50KN

2. Resolution of test force indication: 1/500000

3. Test force indication error: within ± 0.5% of the indication

4. Displacement rate range: 0.001-1000mm/min

5. Test space: 1000mm (excluding clamps)

6. Test width: 400mm

7. Error of large deformation extensometer: ± 1mm

8. Relative displacement error: within ± 0.5% of the displayed value

9. Sampling frequency: 120 points per second

10. Test force measurement range: 0.2% -100%

11. Hengli constant deformation range: 0.5% -100%

12. Power supply: 220V/50HZ

13. Power: 1.6KW

14. Machine size: approximately 530 × 900 × 1600mm (length × width × height)

15. Machine weight: approximately 280Kg