Merck Millipore mixed cellulose filter membrane 25mm 0.65&# 181; m

Merck Millipore mixed cellulose filter membrane 25mm 0.65 µ m

Product Introduction

1. Product Overview
This product is MF Millipore ™ Series mixed cellulose ester filter membrane, model DAWP02500. The filter membrane has a diameter of 25 millimeters, a pore size of 0.65 micrometers, hydrophilicity, and a porosity of approximately 81%. Its design is suitable for various laboratory analysis applications such as particle removal, microbial retention, and environmental monitoring.

2. Technical characteristics

• Material and StructureMade from a mixture of cellulose acetate and cellulose nitrate, it is a white, meshless circular film.

• performance parametersAt 23 ° C, the bubble point of water shall not be less than 1.17 bar. The water flow rate is about 140 mL/min · cm ², and the air flow rate is about 9 L/min · cm ². The protein binding capacity is approximately 150 µ g/cm ².

• Low extractThis filter membrane does not contain Triton surfactant and has a low water extractable content (about 3%).

• SustainabilityClassified as a green alternative product, its inner and outer packaging boxes are made of bio cyclic materials that follow ISCC quality balance distribution.

• Sterilization compatibilityCompatible with ethylene oxide, gamma rays, and high-pressure sterilization methods.

• Safety ReminderThe product is classified as a flammable solid hazardous material, and corresponding storage and disposal conditions should be noted.

3. Technical specifications

4. Typical applications
This filter membrane can be applied in the following scenarios:

• Particle removalUsed for clarification of liquid samples or analysis of particulate matter.

• Microbial testingSuitable for intercepting yeast, mold, algae, and microorganisms for subsequent cultivation and analysis.

• Microbiology of dairy productsCan be used for quality control testing in dairy products and related industries.

• Microplastic analysisCollect and detect microplastic particles in environmental samples.

5. Instructions for use
The product is in non sterile packaging, and users can choose the appropriate sterilization method according to their experimental needs. Its 0.65 µ m pore size is suitable for intercepting larger biological pollutants or collecting particulate matter.

Merck Millipore mixed cellulose filter membrane 25mm 0.65 µ m

The content is for reference only, please carefully discern.