Melt flow rate meter for meltblown fabrics

1、 Product Introduction:

Melt flow rate meter for meltblown fabricsCompliant with the requirements of GB/T3682-2000 standard, the main parameters also meet the requirements of ISO1133-97, ASTM1238, JIS and other standards, which can be used for polyethylene, polypropylene, polystyrene, etc ABS、 The melt mass flow rate (MFR) or melt volume flow rate (MVR) of various plastic materials such as polyamide, fiber resin, acrylic ester, polyoxymethylene, fluoroplastics, and polycarbonate are widely used in plastic production, plastic products, petrochemical industry, as well as related universities, research institutions, and inspection departments for measurement.

2、 Product features:

A. High precision Chinese and English color controller, specially customized film buttons, have advantages in control accuracy and service life

B. Hand automatic cutting integrated control, up to 0.1s, cutting time and cutting frequency can be set arbitrarily.

C. Built in micro printer, capable of printing test data

D. The dual temperature control system adopts dual inlet heating coils and dual inlet PT100 platinum resistance sensors to improve testing accuracy and temperature stability.

E. Adding displacement sensors can test MVR (volume method) with an accuracy of 0.01mm.

F. Volume method testing does not require cutting and can directly output test results

G. The density value of a material at a specific temperature can be calculated by the ratio of the volumetric method to the mass method

H. It can be connected to a computer via USB and set test conditions, print data, and store data (optional) on the computer through software.

3、 Testing method:Quality method, volume method (MFR, MVR)

4、 Display mode:English color LCD display

5Melt flow rate meter for meltblown fabricsMain technical parameters:

1. Equipment model: KD5005

2. Temperature range: 0 ℃ -450 ℃

3. Temperature fluctuation: ± 0.2 ℃

4. Temperature uniformity: ± 1 ℃

5. Temperature display resolution: 0.1 ℃

6. Time display resolution: 0.1S

7. Mouth mold diameter: Φ 2.095 ± 0.005mm/Φ 1.05mm ± 0.005mm

8. Discharge port length: 8.000 ± 0.025mm

9. Diameter of loading cylinder: Φ 9.550 ± 0.025mm

10. Weight accuracy: ± 0.5%

11. Displacement measurement accuracy: 0.01mm

12. Displacement measurement encoder: Omron photoelectric rotary encoder

13. Quality method testing range: 0.1-150g/10min

14. Volume method testing range: 50-800cm3/10min

15. Output method: Micro automatic printing output

16. Cutting method: Hand automatic cutting integrated

17. Test load: 8 levels in total, 8 sets of weights

18. Power supply voltage: AC220V ± 10% 50HZ