Meiruike Precision Resistance Tester

NegotiableUpdate on 12/13

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Meiruike Precision Resistance Tester RK2514N $r $nRK2514AN DC Low Resistance Tester adopts the current mainstream 32bits CPU and high-density SMD mounting process, 24 bit 4.3-inch IPS color LCD display, and up, down, left, and right function keys, with a refreshing interface and convenient operation; It is used for relay contact resistance, connector plug resistance, wire resistance, printed board circuit and solder hole resistance, etc

Product Details

Meiruike Precision Resistance TesterRK2514N

The RK2514AN DC low resistance tester adopts the current mainstream 32bits CPU and high-density SMD mounting process, with 24 bit color4.3-inch IPS color LCD display and up, down, left, and right function keysThe interface is refreshing and easy to operate; It is used for relay contact resistance, connector plug resistance, wire resistance, printed board circuit and solder hole resistance, etc;Temperature compensation can eliminate the influence of environmental temperature on testing work; The RK2514N series provides multiple interface functions for convenient data communication and remote control with PC.

Application field

Widely used for measuring the resistance of various coils, motor transformer windings, wire resistance of various cables, contact resistance and metal riveting resistance of electrical components such as switch plugs and sockets, metal flaw detection, etc. It can output good/bad product signals using Handler, USB, and RS232 interfaces for automated testing.

Performance Characteristics

1. Poor contact detection function prevents misjudgment during testing
2. Maximum resistance accuracy: 0.01%; Minimum resolution of resistance 1 μ Ω
3. Basic temperature accuracy: 0.1 ℃
4. Maximum testing range1μΩ～110MΩ
5. Zero base design, no need to reset for weak resistance testing
6. Maximum testing speed: approximately 100 times per second
7. 14 level comparison function: 12 levels pass/exceed upper limit/exceed lower limit
8. Multiple triggering methods: internal, external, contact, and manual triggering
9. Remote Control via RS232 C/Handler/USB/RS485 Interface
10. Record test data on USB flash drive and remotely upgrade instrument software
11. Real time recording of qualified/unqualified product quantity
12. Low voltage testing mode effectively protects the tested component

Meiruike Precision Resistance TesterRK2514N

model	RK2514N	RK2514AN	RK2515N	RK2515AN	RK2516N	RK2516AN	RK2516BN
resistance measurement
measurement range	0.1μΩ～110MΩ	1μΩ～20MΩ	0.1μΩ～110MΩ	1μΩ～20MΩ	1μΩ～2MΩ	1μΩ～200kΩ	10μΩ～20kΩ
resistance range	Basic accuracy0.01%		Basic accuracy0.02%		0.05%
Maximum test current	1A						100mA
display
monitor	24 bit color, 480 * 272 resolution true color IPS LCD screen
Number of reading digits	Five and a half digit display of resistance value				Four and a half digit display of resistance value
Measurement function
Resistance measurement time	fast: 7ms Medium speed: 42ms Slow/Precision measurement: 150ms (an additional 15ms is added when the above display is turned on)				fast20ms slow speed: 40ms
Temperature measurement time	/——				100ms	/——
Thermoelectric elimination	√				——/
Test end configuration	Four ends
Statistical Function	Up Super/Statistics on the quantity of qualified products below the limit
Save test parameters	10 groups				5 groups
Low voltage measurement	open-circuit voltage: ≤ 60mV Effective range: 2 Ω～ 20 Ω				/——
Poor contact detection	Check if there is poor contact on the testing end
temperature measurement
measurement parameters	PT1000: Accuracy 0.1 ℃					——
display range	-10℃-99.9℃
comparator
signal output	HI/PASS1/PASS2/LO/FAIL				HI/PASS1/PASS2/PASS3/LO/FAIL
News ringing	qualified/Unqualified/Closed
Limit setting method	14 levels; Absolute upper/lower limit; Percentage upper/lower limit+nominal value				3 levels; Absolute upper/lower limit; Percentage upper/lower limit+nominal value
Other parameters
interface	USB HOST/USB DEVICE/RS232/HANDLER/RS485				USB HOST/RS232/Handler/RS485 (optional)
working environment	temperature 0 ℃~40 ℃ humidity<80% RH
weight	Net weight approximately3.5kg
standard configuration	Four end Kelvin test clip, temperature probeUSB/232 communication cable, power cord, upper computer software				RK26004A test line, upper computer software	RK26004A test line, power line, upper computer software
optional	RK00070 serial port option LAN port				/