Mechanical level calibration device

SPC-1 level ruler standard set

1Mechanical level calibration deviceInstrument usage:

According to the requirements of JJF 1085-2002 Level Calibration Specification. Our company has developed the SPC-1 level ruler standard set. This standard set can calibrate a 1000mm level ruler, and this product is currently widely used in the measurement and testing work of various enterprises, institutions, military, aerospace, and nuclear power engineering projects across the country.

2、 Overview of the Level Gauge Calibration Platform:

1. The SPC-1 level calibration table is composed of high-quality granite level rulers. As shown in the figure, the workbench can be raised and lowered by ± 30mm at a turning angle, and can be adjusted horizontally with the help of a 0.02mm/m precision level. During work, the pointer type dial gauge is used to measure on the workbench surface.

Mechanical level calibration deviceEasy to operate, fast, stable, and high-precision calibration instrument with a division value of 0.1mm/m and no mechanical scale.

3、 Technical parameters of the dedicated calibration table for level ruler:

1. Level calibration specification: ≤ 1000mm;

2. Division value: 0.02mm/m (angle 4 ");

3. Workface flatness: Level 0;

4. Measurement range: suitable for calibration of level gauges with division values of 0.5, 1, 2, 5, and 10 mm/m;

5. Working face: 1200mm × 100mm;

6、 体积： 1200mmx100mmx150mm；

7. Weight: Approximately 52.0kg.

4、 Technical parameters for dedicated planar parallel columns:

1. Working face length: 1000mm;

2. Flatness of working face: Double working face level 0;

3. Parallelism of two working faces:<0.020mm;

4. Weight: Approximately 57.0kg.

5、 Special 45 ° angle ruler technical parameters:

1. Working face length: 1000mm;

2. Workface flatness: Level 0 (vertical and oblique edges);

3. 45 ° angle difference: ± 2 ';

4. Weight: 100kg.

6、 Configuration List: