Welcome Customer !

Membership

Help

Shaanxi Bingfeng Industry and Trade Co., Ltd
Custom manufacturer

Main Products:

instrumentb2b>Products

Shaanxi Bingfeng Industry and Trade Co., Ltd

  • E-mail

  • Phone

    18966925217

  • Address

    No. 143 Sanqiao Street, Xi'an City, Shaanxi Province

Contact Now

Mechanical large-diameter heat meter

NegotiableUpdate on 04/08
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin

Overview

The main control parameters selected for mechanical heat meters are: nominal diameter DN, common flow rate, maximum flow rate, minimum flow rate, rated pressure, maximum pressure loss, temperature range, temperature difference range, etc. Product features of JFRL-50-300 mechanical large-diameter heat meter: 1. The electronic computing unit adopts the MSP430 series 16 bit microprocessor from TI in the United States; 2. Advanced low-power design; 3. Compact structure, integrated design, sturdy structure with good resistance to damage; 4. Dual use of hot and cold, measure heat when the inlet water temperature is greater than 28 ℃ under flow conditions; Measure the cooling capacity when the inlet water temperature is less than 22 ℃; 5. Installed for both water inlet and return purposes; 6. MBUS and 485 interfaces enable remote data transmission and centralized control.

Product Details

The main control parameters selected for mechanical heat meters are: nominal diameter DN, common flow rate, maximum flow rate, minimum flow rate, rated pressure, maximum pressure loss, temperature range, temperature difference range, etc.

Product features of JFRL-50-300 mechanical large-diameter heat meter:

1. The electronic computing unit adopts the MSP430 series 16 bit microprocessor from TI in the United States;

2. Advanced low-power design;

3. Compact structure, integrated design, sturdy structure with good resistance to damage;

4. Dual use of hot and cold, measure heat when the inlet water temperature is greater than 28 ℃ under flow conditions; Measure the cooling capacity when the inlet water temperature is less than 22 ℃;

5. Installed for both water inlet and return purposes;

6. MBUS and 485 interfaces enable remote data transmission and centralized control.