-
E-mail
3066993710@qq.com
-
Phone
18040551366
-
Address
No. 422, Road 22, Binhai Park, Wenzhou Economic and Technological Development Zone, Zhejiang Province
Product Categories
Chuanli Holdings Co., Ltd
Mechanical anti-theft soft seal gate valve
NegotiableUpdate on 06/12
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Mechanical anti-theft soft seal gate valve
Product Details
Mechanical anti-theft soft seal gate valve
The gate of the gate valve is wrapped in special rubber as a whole, which utilizes the elastic deformation of the rubber to make the valve sealed and achieve zero leakage. There is no gate slot in the valve chamber, no debris is trapped, minimal resistance, and the switch is lightweight. Adopting three "o" - shaped sealing rings, it does not press the disc root and is maintenance free. Both the inside and outside of the valve body are coated with non-toxic epoxy resin through electrostatic spraying, which does not produce rust water and can meet the requirements for direct drinking water.
Technical Parameter
model |
z15x-10 |
z15x-16 |
| nominal pressure | 1.0mpa(10kgf/cm2) | 1.6mpa(16kgf/cm2) |
| Nominal Diameter | 15～100mm | 15～100mm |
| Sealing experiment pressure | 1.1mpa(11kgf/cm2) | 1.76mpa(17.6kgf/cm2) |
| Strength test pressure | 1.5mpa(15kgf/cm2) | 2.4mpa(24kgf/cm2) |
| Temperature | -40～100℃ | -40～100℃ |
| Applicable Medium | water | water |
| Drive mode | Manual, electric, pneumatic, hydraulic, electromagnetic | Manual, electric, pneumatic, hydraulic, electromagnetic |
We can also provide products with special technical parameters according to customer requirements | ||
Valve Material List
| valve body | Grey cast iron, ductile iron |
| Ram | Grey cast iron, ductile iron nbr、nr、epdm |
| valve cover | Grey cast iron, ductile iron |
| handwheel | Carbon steel, gray cast iron, ductile iron |
| valve stem | stainless steel |
| gland | brass |
| stem nut | brass |
| sealing ring | nbr |
Manufacture Specification
The valve connection dimensions comply with the GB17241.6-1998 standard, the valve structure length complies with the GB/T12221-1989 short series standard, and the pressure test complies with the requirements of GB/T13927-1992.
data table(Unit: mm)
Nominal diameter (dn) |
Structure length |
h |
bolt |
||||||||
10kg |
16kg |
Reference weight kg |
|||||||||
Diameter of the center circle of the screw hole d |
Bolt hole diameter |
quantity |
thread specification |
Diameter of the center circle of the screw hole d |
Bolt hole diameter |
quantity |
thread specification | ||||
40 |
165 |
170 |
110 |
19 |
4 |
m16 |
110 |
19 |
4 |
m16 |
7 |
50 |
178 |
185 |
125 |
19 |
4 |
m16 |
125 |
19 |
4 |
m16 |
9 |
65 |
190 |
205 |
145 |
19 |
4 |
m16 |
145 |
19 |
4 |
m16 |
11 |
80 |
203 |
310 |
160 |
19 |
8 |
m16 |
160 |
19 |
8 |
m16 |
16 |
100 |
229 |
340 |
180 |
19 |
8 |
m16 |
180 |
19 |
8 |
m16 |
27 |
