Material testing, material analyzer

model

X200

★ Source of stimulation

Standard 50 kV, 200 uA, 4 W, Rh target X-ray tube

★ Detector

Large area SDD detector. Detector protection: Industrial grade double-layer detector protection technology is adopted, with a built-in metal detector to protect the shutter. It automatically opens during testing and closes after testing to better protect the detector and prevent damage. The explosion-proof film, shutter device, and carbon fiber protective net distributed from the outside to the inside provide strong protection for fragile and expensive detectors. The shutter device can also effectively block X-rays and prevent accidental injuries.

standard block

Configure 316 stainless steel standard block for self calibration

Analyze the environment

The instrument is equipped with large-area corrugated aluminum fins for heat dissipation, with an ambient operating temperature range of -20 ℃ to 55 ℃; Environmental humidity: 10%~90%

★ Dimensions:

Dimensions: 215mm x 241mm x 61mm; Weight:<1.35Kg; no external support required, the instrument can be directly inverted on a horizontal plane, making testing more effortless

Configure elements

The ore mode provides the following pre calibration elements: Mg,Al,Si,S,P, K,Ca,Cu,Pb, Zn,Ni, Co, Mn, Fe, Au, Ti, V, Cr, As, Se, Rb, Sr,Y, Zr, W,Ta,Nb, Mo, Ag, Cd, Sn,W,Sb, Ba, Hg

filter

Up to 6 filters;

monitor

5-inch color touch screen LCD capacitive touch screen, smartphone style display screen - PowerVR SGX540 3D graphics

★ Dual cameras

The instrument is equipped with high-definition color dual cameras with a resolution of 12 million pixels, which can be used to determine the position of the probe illumination using both distant and close range cameras; Can enable users to accurately observe and analyze the photographed parts, and automatically save the photos in PDF reports, which can be Bluetooth uploaded to users' Android devices such as mobile phones

collimator

Built in small dot collimator, can focus X-ray beam into a spot with a diameter of ≤ 3mm, can directly aim and test the position of fine seams/spots, and has better detection effect on small samples

★ Operating System

Android intelligent operating system

calculation method

Basic parameter method, empirical coefficient method;

★ Storage card

16GB storage

data format

CSV and PDF formats; It is possible to export sample photos and data together into a PDF testing report

data transmission

USB interface or WiFi wireless, Bluetooth wireless data transmission for mobile phones and other terminals

Host power supply system

Two lithium batteries, plug-in rechargeable lithium, with a capacity of 3500mAh, can be charged inside the device or using an external charger. They are powered by AC power and support hot swappable battery replacement; The available voltage is 110/220V, and each battery can be used continuously for 6-8 hours after being fully charged; Just like a mobile phone, it can work while charging.

★ Remote operation

Configure remote control button to enable remote operation of equipment and detection of samples

Automatic diagnosis and fault reporting function

Machine faults and software upgrades can be remotely diagnosed through the Internet, and hardware upgrades can be done remotely

measurement method

It can be tested independently or connected to a computer to control the instrument for data collection and export; Start the trigger control test by tapping or pulling the trigger, and the testing process does not require a long pull of the trigger

portability

The device combines the advantages of modern electronics and technology, designed with an Android system and integrated with a single hand operation. It comes with a drop resistant wristband, making it easy to carry and fall resistant, suitable for on-site operations

robustness

The equipment adopts a fully enclosed optical system, designed for moisture resistance, impact resistance, and earthquake resistance

★ Automatic scanning platform

The fully automatic scanning platform utilizes the XYZ three-axis platform equipped with component detection equipment to achieve fully automatic material component detection and analysis. The detection results are synchronously transmitted to the computer control software and can be displayed in real time

★ Automatic scanning software

Professional scanning software can be set up for automated analysis and testing, conducting large-scale, diversified, and multi-point sample testing such as single point, multi column, multi row, oblique point, scatter point, etc

★ Two dimensional distribution of data

Professional analysis software can control the start and stop of equipment, achieve data integration display function, and display the two-dimensional trend distribution of large-scale test data

★ Bracket anti-collision function

The connection between this scanning table and the component detection equipment can be slid vertically, which can automatically adjust the distance between the component detection equipment and the sample to be detected during testing to provide a buffering effect, avoiding damage to the probe caused by contact between the surface of the sample to be detected and the component detection equipment, and providing good protection for the component detection equipment