Marposs Balance System for Milling and Turning

Balance system for milling and turning

Imbalance is the most common source of vibration on machine tools. Regarding grinding wheelsBalancing the handle and spindle is very important.

In the past few decades, dynamic balancing has become a popular tool in the field of grinding machinesAs a standard, and also in combination machine tools(Milling and turningpare)Applied on vertical lathes, especially for asymmetric zeroProcessing of parts. Minimizing vibration as much as possible can not only increase the shaftThe working life of the tool can be extended while also improving the workpieceThe surface processing quality.

P6001FDModules are used asDittelPre balanced familyP6000The latest supplement in *, this module isSpecially designed for low-speed machine tools.

The imbalance of the workbench in the predefined plane can be addressed through pre adjustmentThe equilibrium cycle was discovered and then passed through the rotary worktableConfigure weights with known balance weights at specific locations to compensateCompensation.

P6001FDCan engage in searching in the pre defined weight tableFind the most suitable weight. The fixed position algorithm will be used up to24Find a good location among the positions and place two of themOr three weights. This electronic device also provides noThe function of intermittently monitoring the vibration level of the rotary table.

P6001FDIt can be controlled by the machine tool control unit or any other baseYuWindowsofPCProgram, use, and display.Signal passes throughProfibusOr staticI/OInterface and Machine ToolExchange.

characteristic•filtered-RPM-Unbalanced monitoring, RPMscope80-6000 1/min•Continuous unbalanced monitoring•Intelligent and customizable image usersinterface• ProfiBUSAnd staticI/OsCommunication通道•passEthernetConnect visualization•Simple software integration•Simple factory reset(series setup)•Independent adjustable user level

Manual single-sided balancing is used for-Rotating worktable-Asymmetric workpiece-Milling and turning machine tools-Vertical lathe-Low speed