- Phone
-
Address
No. 4, Courtyard 3, Jinguan North Second Street, Nanfaxin Town, Shunyi District, Beijing
Product Categories
Beijing Handasen Machinery Technology Co., Ltd
Marco SPA self-priming electric pump with spiral bronze gears
NegotiableUpdate on 05/18
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Marco SPA self-priming electric pump with spiral bronze gears and product introduction: UP2-P 24V is a self-priming electric pump with spiral bronze gears, used for conveying lubricating oil and viscous liquids. Nickel plated brass body and stainless steel shaft. Specially suitable for using the special tube kit (OK1) to drain the engine oil pan and perform engine lubrication operations.
Product Details
Marco SPA self-priming electric pump with spiral bronze gears
Marco SPA Italy produces UP2-P 24V pump with polymer gear for 10 liters per minute
Origin: Italy
UP2/OIL lubricating oil gear pump
A self-priming electric pump with spiral bronze gears, used for conveying lubricating oil and viscous liquids. Nickel plated brass body and stainless steel shaft. Specially suitable for using the special tube kit (OK1) to drain the engine oil pan and perform engine lubrication operations.
UP2-P 24V is a self-priming electric pump with spiral bronze gears, used for conveying lubricating oil and viscous liquids. Nickel plated brass body and stainless steel shaft. Specially suitable for using the special tube kit (OK1) to drain the engine oil pan and perform engine lubrication operations.
UP12-LO bronze gear pump, used for light oil at 26 liters per minute
UP12-LOCK portable gear pump kit for oil and gas
UP12/OIL lubricating oil gear pump
UP14/OIL lubricating oil gear pump
UP3/OIL lubricating oil gear pump
UP9/OIL (ex UP6/oil) lubricating oil gear pump
Technical parameter table of UP2-P 24V pump
| parameter item | specification |
|---|---|
| model | UP2-P 24V |
| voltage | 24V DC |
| traffic | 10 L/min |
| pump type | Polymer gear pump |
| Maximum work pressure | 3 bar |
| pump body material | Polymer (corrosion-resistant) |
| pump speed | Up to 3000 RPM |
| Medium temperature range | -10 ° C to+60 ° C |
| Maximum suction lift | 2 m |
| Output port size | 1/2 'thread |
| Pump body size | 180 x 90 x 120 mm |
| Pump weight | 2.5 kg |
| power consumption | 50 W |
| noise level | ≤ 60 dB(A) |
| Applicable Medium | Water based liquids, lubricants, coolants, chemical solutions |
| Sealing method | O-ring |
| service life | Long term stable operation with low maintenance requirements |
| certification | CE certification, compliant with ISO standards |
Typical applications of UP2/OIL 24V include the transportation of lubricating oil or viscous liquids, the transportation of antifreeze, and engine emissions. It is particularly suitable for using the special pipe kit OK1 to drain the engine oil pan and perform engine lubrication operations. To ensure the correct direction of fluid flow as indicated by the arrows on the top plate, it is necessary to connect the positive pole powered by the battery to the red line on the motor end cover and the negative pole to the black line. Sufficient wiring terminals and connectors must be used for electrical connections to ensure a tight fit of the cables. Poor wiring can lead to power loss and/or overheating of the cable itself. Under high working pressure conditions, such as outlet closure or blockage, or excessive pressure caused by long conveying circuits and/or attachments, it may be subjected to high stress and overheating, so it should not be used for a long time under such conditions. The IP67 protection level of the motor provides comprehensive protection, preventing dust and particles in the air from entering, as well as preventing water and liquids from entering, up to a depth of 1 meter.
Marco SPA self-priming electric pump with spiral bronze gears
Similar Product Recommend
