Manufacturer of medium pressure disinfection equipment for swimming pools in Guangxi region

Manufacturer of medium pressure disinfection equipment for swimming pools in Guangxi region

Manufacturer of medium pressure disinfection equipment for swimming pools in Guangxi region

Decompose residual chlorine and degraded chemical chlorine in water: When using a medium pressure ultraviolet sterilizer for water disinfection, it can reduce the chlorine content in the water, reduce disinfection by-products, and make the water environment healthier. Medium pressure ultraviolet radiation has the ability to degrade chlorinated compounds, including monochloramine, dichloroamine, trichloroamine, etc., effectively preventing the production of carcinogenic substance trihalomethanes and eliminating the impact of chlorinated compounds on the human body.
Low operating cost: Due to the improvement of technology, medium voltage ultraviolet disinfection technology not only has the highest disinfection efficiency among all disinfection methods, but also has simple operation and maintenance, low operating costs, and can reach 4 centimeters per ton of water at a processing capacity of 1000 tons

Advantages of medium pressure ultraviolet radiation in swimming pools:
1. Comparison of sterilization efficiency of medium and low pressure ultraviolet radiation
Low voltage ultraviolet lamps have high sterilization efficiency at a wavelength of 253.7nm. But it only outputs a single frequency spectrum continuously, with a narrow and short wavelength range; The wavelength range of medium voltage ultraviolet lamps is wide, and many bacteria can be killed. For low load slightly polluted water bodies such as swimming pools, the sterilization effect is very obvious.

2. Effectively improve the ultraviolet penetration rate of swimming pool water quality
Penetration rate is one of the standards for evaluating water quality. When ultraviolet light passes through a water layer, due to the presence of organic or inorganic substances in the water
Substances absorb ultraviolet light intensity, thereby reducing the intensity of ultraviolet radiation. According to relevant reports, medium pressure ultraviolet radiation can increase the penetration rate of water quality from 75% to at least 97%.

3. The influence of temperature on sterilization effect
The water temperature of a typical swimming pool is 26 ℃~28 ℃ or higher, which is higher than the evaluation temperature for the effectiveness of general disinfectants and disinfection methods (usually lower than this temperature for both tap water and sewage). From the graph below, it can be seen that the efficiency of low-pressure ultraviolet lamps is greatly affected by temperature, while the efficiency of medium pressure ultraviolet lamps is basically unaffected by temperature.