Maintenance and upkeep of the AiFaKe VSN6501 vacuum pump

AiFaKe VSN6501 vacuum pump maintenance, providing one-stop accessories AiFaKe vacuum pump oil, original AiFaKe vacuum pump accessories, fast service quality

　　Maintenance and upkeep of the AiFaKe VSN6501 vacuum pumpProvide one-stop accessories for AiFaKe vacuum pump oil, original AiFaKe vacuum pump accessories, fast service quality. ULVAC VSN2401 vacuum pump from Japan is stuck and leaking oil. Repair and maintenance of ULVAC VSN6501 vacuum pump is mainly used in the following industries: 1. Coating, sputtering, ion plating, 2. Gas displacement, filling, vacuum insulation, 3. Vacuum heat treatment furnace, sintering furnace, brazing furnace, 4. Vacuum drying, freeze-drying, vacuum degassing, 5. Leak detection device, vacuum forming, vacuum casting, 6. Vacuum packaging, vacuum adsorption, transportation, and other sputtering coating machines. Vacuum pump maintenance for ULVAC VSN6501 vacuum pump maintenance for Roots pump maintenance

The main features of the AiFaKe VSN6501 vacuum pump are: 1. It achieves low noise: due to the use of a structure that reduces operating sound at maximum pressure, the noise level of VSN1501 and VSN2401 can be lower than 74dB (A) (measured at 1 meter away from the pump with an oil mist filter when reaching the maximum pressure). 2. Achieved low vibration: Due to the use of a rotary blade structure, it can achieve high speed (50Hz, 1500r/min), greatly reducing vibration in the low-frequency range where vibration transmission is high. Therefore, there is no need for large-scale infrastructure projects and it is easy to place it on the 2nd and 3rd floors of the factory building. 3. Maintenance performance of * * *: For the convenience of daily maintenance work, the direction of measurement confirmation, oil replenishment, and oil replacement is the same operation direction. To extend the oil replenishment period, a variable oil volume of 8-10.5L was used.

Maintenance and upkeep of the AiFaKe VSN6501 vacuum pumpDuring long-term use, the following phenomena may occur: 1. Friction on the end cover surface, 2. Friction marks on the rotor surface, 3. Bearing covered with dirt, 4. Oil leakage from the shaft seal, 5. Damaged rotor blades, and 6. Wear of the shaft sleeve or above can cause the AiFaKe VSN6501 vacuum pump to jam and leak oil. Dongguan Kechuang Vacuum Electromechanical Co., Ltd. specializes in repairing imported vacuum pumps, including AiFaKe vacuum pumps, AiFaKe R-7 vacuum pumps, and AiFaKe vacuum pump oil. AiFaKe vacuum pump repair kits are available in Dongguan, with excellent quality and fast service. Sputtering coating machine vacuum pump maintenance AiFaKe VSN6501 vacuum pump repair Roots pump repair