MY132Q-QZDK Fully Automatic Pressure Gauge Calibration Instrument

Detailed information on the fully automatic pressure gauge calibrator:

MY132Q-QZDKFully automatic pressure gauge calibrator（The air pressure adopts a standard integrated design, modular integration, and overall design layout, integrating pressure generation, pressure control, testing, data acquisition, and data processing. The pressure generation and control system is located inside the platform, and the pressure measurement standard can be selected from our company's standard digital pressure module or intelligent digital pressure calibrator. The lower computer adopts a 10 inch color touch screen, which is simple and intuitive for users to quickly grasp and operate. The fully automatic pressure calibration table (air pressure) is widely used in various levels of measurement units, petroleum, chemical, power, metallurgy, national defense, manufacturing, scientific research institutions and other industries. It is suitable for laboratory calibration/verification of general pressure gauges, precision pressure gauges, digital pressure gauges, pressure transmitters, pressure sensors, pressure switches, etc.

Fully automatic pressure gauge calibratorOverview:

1. Compliant with the latest national calibration regulations, it can calibrate products such as general pressure gauges, precision pressure gauges, digital pressure gauges, pressure switches, pressure sensors, pressure transmitters, etc;

2. The equipment mainly consists of the device body, fully automatic pressure generation and control system, high-precision measurement system, standard digital pressure module, computer and printer (optional), measurement software and accessories, etc;

3. The pressure control method adopts high-precision control valve and servo stepless automatic control mode, which can quickly increase and decrease pressure and instantly stabilize;

Both the upper computer software and the lower computer touch screen can achieve automatic control;

5. Equipped with pressure control data, real-time pressure display, data storage and output functions;

6. It can be set at any fixed point within the range to achieve automatic pressure control at a fixed point;

7. The number and frequency of calibration points, as well as the single point voltage stabilization time, can be edited. The system automatically divides the range into equal parts, and the pressure rise and fall cycles automatically without manual intervention;

8. Forward and backward push function, easy to achieve reverse calibration of pointer meters;

9. Icon based management menu; Chinese and English operation interface, 10 inch touch screen display;

10. Display of measurement value digits: 4, 5, or 6 digits can be customized;

12. Equipped with misconnection protection function to prevent circuit damage;

13. The accuracy of its output pressure is based on the digital pressure standard module as the pressure control basis, using a dual closed-loop control scheme of pressure and pressure change rate, with fast response and no overshoot;

14. It has complete protection functions, such as overvoltage (if it exceeds 120% of the range, an alarm will be issued), sensor failure, etc., to protect the safety of the calibrated meter;

15. The pressure calibration system can achieve full range automatic pressurization, depressurization, stabilization, data acquisition, error calculation, storage, etc., and print calibration records, error curves, and certificates that comply with national calibration regulations;

16. The fully automatic pressure calibration system can replace digital pressure modules with different ranges as standards as needed, used to calibrate instruments with different ranges and accuracies;

17. Pressure unit: PSI、inH20、inHg、mbar、bar、mmH2O、mH2O、mmHg、mHg、kgf/cm 、hpa、Pa (KPa)、kPa (MPa) Cycle between units.

18. Pressure interface: Pressure output bracket 2 * M20 * 1.5 (with built-in filtering structure).

Fully automatic pressure gauge calibrator(Air pressure) Technical indicators:

1. Built in standard gauge and automatic pressure source, with a maximum air pressure of -95-4MPa; Hydraulic: 0-60MPa, 0-100Mpa

2. Intelligent interaction technology;

3. The highest accuracy level can reach: 0.05% F.S, 0.02% F.S;

4. The product is designed with a built-in sewage outlet filter.

5. Pressure range:

Air pressure: -95-1.0Mpa -95-1.6Mpa -95-2.0Mpa -95-4.0Mpa -95-2.5Mpa (contact customer service for more ranges)

Hydraulic: 0-6Mpa 0-10Mpa 0-15Mpa 0-20Mpa 0-25Mpa 0-30Mpa 0-40Mpa 0-60Mpa 0-70Mpa 0-100Mpa (For more ranges, please contact customer service)

Micro pressure ± 10kpa, ± 30kpa ± 40kpa ± 60kpa 0-100kpa 0-250kpa 0-300kpa 0-400kpa 0-600kpa (contact customer service for more ranges)

6. Communication interface for external rear pressure module

7. Pressure interface: ultra fast movable joint M20 * 1.5 with four pressure output ports

8. Measuring medium: clean air

9. Accuracy: Pressure 0.05% F • S, 0.02% F • S Voltage and current: ± (0.01% R.D+0.005% F • S)

10. Operating temperature: 0-50 ℃

11. Dimensions: 670 × 330 × 330 (length × width × height mm)

12. Instrument weight: 45kg

Precautions for fully automatic pressure gauge calibrator:

1. Avoid using the equipment in environments with corrosive gases and dust particles.

2. Long term storage should be carried out in a dry, non corrosive gas, and sun proof environment.

3. Regularly unscrew the filter cover and clean the oil stains.

4. When the following conditions occur, the system will automatically end the control and force a reset:

1) When the working time of the air pressure pump exceeds 30 seconds and the pressure does not reach 2% of the target value

2) When boosting, the pressure drops by more than 20% instantly

3) When the booster fine-tuning pump reaches the+or - end point, 5 Do not turn off the power when under pressure.

Note: The range, quantity, and accuracy of the standard digital pressure module can be selected and expanded according to the actual requirements of the user.