MR50/MR51/MR52/MR500C/MR501C Reading Head

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The MR50/MR51/MR52/MR500C/MR501C reading head is an LED intelligent status display with a built-in sensing head. It has a small volume and is suitable for small installation spaces. And it adopts a high protection level design (IP67), which can be used in harsh environments such as oil pollution, cutting, vibration, etc. In industrial applications, it can avoid the sensitivity of general optical environmental pollution and increase the long-term stability of the system

Product Details

MR50/MR51/MR52/MR500C/MR501C Reading HeadStructural advantages

1. The magnetic grid electronic ruler can reach a single length of up to 30 meters without seams, eliminating seam errors and making it more suitable for heavy-duty machine tools with processing distances greater than 3 meters and various large strokes

2. It can be cut to any length as needed, and the operation and installation are flexible and convenient
3. Oil proof, water draining, dust-proof, shock resistant, low temperature resistant (-10 ℃ to+70 ℃), adaptable to various harsh working environments
4. The highest resolution can reach 0.005mm, and the highest movement speed can reach 16 meters per second, which can meet the high-precision speed processing requirements
5. The reading head and sensor achieve non-contact induction without friction loss, making the entire measurement system have a longer service life
6. The middle shell part does not require processing, reducing processing time and lowering costs

MR50/MR51/MR52/MR500C/MR501C Reading HeadInstallation:

Installation requirements for magnetic grid ruler: The installation of magnetic grid ruler should be at least 0.5m away from circuit breakers, relays, motor capacitors, brakes, clutches, pulse width modulators, etc
The cable routing must be separated from the power line to reduce noise interference
Magnetic grid ruler input power supply: voltage tolerance cannot exceed+/-5% Ripple not exceeding 50 mV
Regarding the suppression of electrical interference in magnetic grid rulers: the supply voltage should not exceed the rated value by+/-5v, and the ripple voltage should not exceed 50 mV
AC choke with RC network, such as 0.1 microfarad/100 ohms, installed with free wheel diode to DC coil, RC suppression motor and its circuit breaker coil (in motor terminal box) to provide additional power for electronic devices
The magnetic stripe consists of three parts:
Length ranging from 0.5 to 32 meters
A quite soft and magnetic tape.
Flexible base tape of B-type adhesive rubber tape. Used to support magnetic tapes and provide magnetic field pathways. Made of double-sided tape for machine tool bonding.
This layer of transparent magnetic tape is used to protect rubber magnetic tape, which is flexible and easy to transport. It is supplied separately and bonded with double-layer tape and rubber magnetic tape during use