MF450 semi-automatic linear edge banding machine

Technical Specifications

configuration table

The polishing component grinds the plastic pressure film and removes the residual sol on the workpiece. The polishing device uses a cotton polishing wheel to clean the processed plate, making the edge sealing end face smoother through polishing. The polishing component used for the upper surface of the workpiece is fixed on the upper side without setting the thickness of the workpiece, and the polishing component used for the lower surface of the workpiece is on the lower side. The rotation direction of the motor is opposite to the running direction of the workpiece.

The finishing system is used for the finishing components of the upper and lower ends, and the rough and finishing devices are used to remove excess edge banding material from the upper and lower parts of the processed board edge banding. It adopts a structure such as automatic tracking by a mold and high-frequency high-speed motor to ensure the flatness and smoothness of the upper and lower parts of the trimmed board. This system consists of two parts: a first trimming and a second trimming. The first trimming is a flat blade, and the second trimming is a circular arc blade.

The glue coating system is used to apply glaze adhesive on the edge of the workpiece. The glue coating and edge sealing device uses a special mechanism to evenly coat the edge sealing plate and material, ensuring a stronger adhesive force. The melted glue will fill the glaze adhesive, and the glue will be melted in the glue container. The hot glaze adhesive will be transported to the workpiece by rotating the glue coating shaft. The quantitative device controls the supply amount and adjusts the distance between the glue coating shaft and the workpiece.